QIG 253xxxxxx Fast 2704N_EN USA-CA.book Page 1 Lundi, 2.
QIG 253xxxxxx Fast 2704N_EN USA-CA.book Page 2 Lundi, 2. décembre 2013 1:37 13 F@ST 2704N Sagemcom thanks you for choosing the range of F@ST 2704N routers while hoping that it will provide you with full satisfaction. F@ST 2704N products adapt the ADSL function respectively on POTS (ITU G.992.1/3/5 - Appendix A) and on ISDN (ITU G.992.1/3/5 - Appendix B). F@ST 2704N equipment include four ethernet interfaces (LAN1 to LAN4), one ADSL interface and one USB port (depending model).
QIG 253xxxxxx Fast 2704N_EN USA-CA.book Page 3 Lundi, 2.
QIG 253xxxxxx Fast 2704N_EN USA-CA.book Page 4 Lundi, 2. décembre 2013 1:37 13 F@ST 2704N Safety instructions Power supply source • Do not cover the router’s power adapter. • The router comes with its own power adapter. Do not use another adapter. • This class II adapter does not need to be grounded (earthed). The connection to the electrical network should comply with the indications given on the label. • Use a readily accessible AC power outlet located near the router. The power supply cord is 1.
QIG 253xxxxxx Fast 2704N_EN USA-CA.book Page 5 Lundi, 2. décembre 2013 1:37 13 F@ST 2704N • Avoid blocking any vent openings or exhaust exits on this equipment. Do not place equipment in a built-in installation such as a cabinet that may impede the flow of air through the ventilation openings. • Do not use the router or its peripherals for outdoor transmissions. Maintenance • This equipment is not user serviceable and is to be serviced by qualified personnel only. • Do not disassemble this equipment.
QIG 253xxxxxx Fast 2704N_EN USA-CA.book Page 6 Lundi, 2. décembre 2013 1:37 13 F@ST 2704N For North America IMPORTANT SAFETY INSTRUCTIONS When using this equipment, basic safety precautions should always be followed to reduce the risk of fire, electric shock and injury to persons, including the following: • The equipment is for indoor use in dry locations. • Operate the equipment on maximum ambient temperature 40 °C, without any cover.
QIG 253xxxxxx Fast 2704N_EN USA-CA.book Page 7 Lundi, 2. décembre 2013 1:37 13 F@ST 2704N USA FCC Caution: Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This device complies with part 15 of the FCC Rules.
QIG 253xxxxxx Fast 2704N_EN USA-CA.book Page 8 Lundi, 2. décembre 2013 1:37 13 FCC Radiation Exposure Statement This device complies with FCC radiation exposure limits set forth for an uncontrolled environment and it also complies with Part 15 of the FCC RF Rules. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
QIG 253xxxxxx Fast 2704N_EN USA-CA.book Page 9 Lundi, 2. décembre 2013 1:37 13 F@ST 2704N A plug and jack used to connect this equipment to the premises wiring and telephone network must comply with the applicable FCC Part 68 rules and requirements adopted by the ACTA. A compliant telephone cord and modular plug is provided with this product. It is designed to be connected to a compatible modular jack that is also compliant.
QIG 253xxxxxx Fast 2704N_EN USA-CA.book Page 10 Lundi, 2. décembre 2013 1:37 13 F@ST 2704N Connection to party line service is subject to state tariffs. Contact the state public utility commission, public service commission or corporation commission for information. If your home has specially wired alarm equipment connected to the telephone line, ensure the installation of this equipment does not disable your alarm equipment.
QIG 253xxxxxx Fast 2704N_EN USA-CA.book Page 11 Lundi, 2. décembre 2013 1:37 13 F@ST 2704N L’indice d’équivalence de la sonnerie (IES) sert à indiquer le nombre maximal de terminaux qui peuvent être raccordés à une interface téléphonique. La terminaison d’une interface peut consister en une combinaison quelconque de dispositifs, à la seule condition que la somme d’indices d’équivalence de la sonnerie de tous les dispositifs n’excède pas 5.
QIG 253xxxxxx Fast 2704N_EN USA-CA.book Page 12 Lundi, 2. décembre 2013 1:37 13 F@ST 2704N Cet appareil est conforme aux normes d'exemption de licence RSS d'Industry Canada. Son fonctionnement est soumis aux deux conditions suivantes : 1. cet appareil ne doit pas causer d'interférence et 2. cet appareil doit accepter toute interférence, notamment les interférences qui peuvent affecter son fonctionnement.
QIG 253xxxxxx Fast 2704N_EN USA-CA.book Page 13 Lundi, 2. décembre 2013 1:37 13 F@ST 2704N Connection Connecting your router Make the connections as shown in the diagram below. Line wall socket Phone set Filter/Spitter LINE PHONE Mains Adapter with its lead MODEM ADSL ETH4 ETH3 Line cord ETH2 PWR ETH1 RESET LINE PWR Connecting additional telephones Make the connections as shown in this diagram.
QIG 253xxxxxx Fast 2704N_EN USA-CA.book Page 14 Lundi, 2. décembre 2013 1:37 13 F@ST 2704N Router supervision You can monitor the router’s activity and status using the following sources: • status of the LEDs on the front and left panels of the router, • using the router’s built-in "DSL Router" HTTP controller, available in the HTTP configuration tool, accessible at http://myrouter or http://192.168.1.1.
QIG 253xxxxxx Fast 2704N_EN USA-CA.book Page 15 Lundi, 2.
QIG 253xxxxxx Fast 2704N_EN USA-CA.book Page 16 Lundi, 2. décembre 2013 1:37 13 253xxxxxxA - 12/13 All rights reserved. The information and specifications included are subject to change without prior notice. Sagemcom Broadband SAS tries to ensure that all information in this document is correct, but does not accept liability for error or omission. Non contractual document. All trademarks are registered by their respective owners.