DTR6400T_6700T_9 avril 07 EN.book Page 1 Jeudi, 10. avril 2008 2:38 14 DIGITAL TERRESTRIAL TV RECEIVER / RECORDER WITH HARD DISK AND DOUBLE TUNER DTR 6400T/6700T Software version 0.7.
DTR6400T_6700T_9 avril 07 EN.book Page 2 Jeudi, 10.
DTR6400T_6700T_9 avril 07 EN.book Page I Jeudi, 10. avril 2008 2:38 14 CONTENTS 1. INFORMED OVERVIEW .......................................................................................................1 2. SAFETY RECOMMENDATIONS .......................................................................................... 2 2-1. WHERE TO PUT YOUR TERMINAL? ........................................................................................ 2 2-2. WARNINGS AND SAFETY INSTRUCTIONS ........................
DTR6400T_6700T_9 avril 07 EN.book Page II Jeudi, 10. avril 2008 2:38 14 9. EVERYDAY USE.................................................................................................................17 9-1. SELECTING A TELEVISION CHANNEL .................................................................................. 17 9-2. SELECTING A RADIO CHANNEL ............................................................................................ 18 9-3. ADJUSTING THE AUDIO VOLUME ...........................
DTR6400T_6700T_9 avril 07 EN.book Page 1 Jeudi, 10. avril 2008 2:38 14 1. INFORMED OVERVIEW CONGRATULATIONS! This is a new generation of Sagem Communications receiver dedicated to Digital Terrestrial Television and equipped with a hard disk. With this technological advantage, you can make digital audio/video recordings. Once you have connected your receiver and performed the initial installation, you will be able to enjoy all the services.
DTR6400T_6700T_9 avril 07 EN.book Page 2 Jeudi, 10. avril 2008 2:38 14 2. SAFETY RECOMMENDATIONS Use of your receiver is subject to safety measures designed to protect users and their environment. 2-1 WHERE TO PUT YOUR TERMINAL? In order to guarantee the correct operation of your receiver, you must: • • • • • • place it indoors to protect it from lightning, rain, and sun rays, place it in a dry and well ventilated area, keep it away from heat sources such as radiators, candles, lamps, etc.
DTR6400T_6700T_9 avril 07 EN.book Page 3 Jeudi, 10. avril 2008 2:38 14 • In the event of a storm, it is advisable to unplug the antenna. Even if the receiver and the television set are disconnected from the power supply, lightning can still damage them. Only a personnel approved by the manufacturer can repair the receiver. The non-observance of these safety precautions can result in forfeiture of the guarantee. 2-3 BATTERIES Batteries are easily swallowed by young children.
DTR6400T_6700T_9 avril 07 EN.book Page 4 Jeudi, 10. avril 2008 2:38 14 3. ENVIRONMENT Preservation of the environment is an essential concern of the manufacturer. The desire of the manufacturer is to operate systems observing the environment and consequently it has decided to integrate environmental performances in the life cycle of its products, from manufacturing to commissioning, use and elimination.
DTR6400T_6700T_9 avril 07 EN.book Page 5 Jeudi, 10. avril 2008 2:38 14 3-3 EUROPEAN DIRECTIVE ON WASTE ELECTRICAL AND ELECTRONIC EQUIPMENT (WEEE) In the context of sustainable development, the reduction of wastes to be eliminated by reusing, recycling, composting and energy recovery is strongly advised.
DTR6400T_6700T_9 avril 07 EN.book Page 6 Jeudi, 10. avril 2008 2:38 14 4.
DTR6400T_6700T_9 avril 07 EN.book Page 7 Jeudi, 10. avril 2008 2:38 14 5.
DTR6400T_6700T_9 avril 07 EN.book Page 8 Jeudi, 10. avril 2008 2:38 14 6. QUICK INSTALLATION Before connecting your device, please ensure that Digital Terrestrial Television (DTT) is available in your area. 6-1 FRONT PANEL OF THE RECEIVER Channel selection buttons USB On/Standby button 6-2 CONNECTION OF THE RECEIVER TO THE TV SET Before installing your receiver, please check that the delivery is complete: instructions, remote control, batteries (X2), Scart lead and AC/DC adapter.
DTR6400T_6700T_9 avril 07 EN.book Page 9 Jeudi, 10. avril 2008 2:38 14 6-3 PERIPHERAL CONNECTIONS 6-3-1 Connection to an amplifier and/or a video recorder and/or an analogue decoder Video recorder Decoder Television set YPrPb Audio R/L Amplifier FAN (depending on model) DTR6700T series Connecting auxiliary equipment (e.g. a video recorder) for a television set with a Scart socket. Connecting an audio amplifier, using a lead (RCA) or using a fibre optic lead (IEC958).
DTR6400T_6700T_9 avril 07 EN.book Page 10 Jeudi, 10. avril 2008 2:38 14 6-4 FIRST INSTALLATION After connecting the receiver correctly, a first time installation must be carried out. Switch on your receiver (do not forget to switch on your television set also). A welcome screen is displayed. - When the receiver is ready, press - Select the language and the country (UK) using the to launch the installation. - The receiver automatically searches for the available channels.
DTR6400T_6700T_9 avril 07 EN.book Page 11 Jeudi, 10. avril 2008 2:38 14 7. INSTALLATION MENUS To move in the screens and change the various settings, simply use the keys to indicate your selections, to confirm, and , , and to quit the screens. 7-1 ACCESSING INSTALLATION MENUS Recording timers Recording list Favourite lists Electronic programme guide User settings Receiver settings Media Technical information Radio channels list 7-2 USER SETTINGS To access the user settings screen, press .
DTR6400T_6700T_9 avril 07 EN.book Page 12 Jeudi, 10. avril 2008 2:38 14 7-2-2 User preferences In the USER SETTINGS menu, select USER PREFERENCES. - Banner time-out: you can set the display time of the information banner. - Network monitoring: you can activate network monitoring. If activated, you will be informed of any new channel or service when it is available. - Volume bar time-out: you can set the display time of the volume indicator. - User country: displays your geographical location.
DTR6400T_6700T_9 avril 07 EN.book Page 13 Jeudi, 10. avril 2008 2:38 14 7-2-3 Locking and parental control In the USER SETTING menu, select LOCKING. - Receiver locking: completely locks access to the receiver with an access code. If you select YES, you will be asked to enter your access code (by default 0000) each time you switch your receiver on. - Channel locking: enables you to lock channels. You will be asked to enter your access code each time you want to watch a locked channel.
DTR6400T_6700T_9 avril 07 EN.book Page 14 Jeudi, 10. avril 2008 2:38 14 7-4 RECEIVER SETTINGS To access the receiver configuration screen, press SETTINGS. . In the main menu, select RECEIVER If you have changed the default access code, you will be asked for your access code (to modify this code, see “Changing the receiver code (access code)”, page 13). 7-4-1 Automatic channel search In the RECEIVER SETTINGS menu, select CHANNEL SEARCH. Press to start a new channel search.
DTR6400T_6700T_9 avril 07 EN.book Page 15 Jeudi, 10. avril 2008 2:38 14 - HDMI OUTPUT*:select YES to active the output. - HDMI RESOLUTION*: select the resolution (576i, 576p, 720p 720p or 1080i depending on the resolutions offer on your television set) for the HDMI output. At the first installation, the receiver offers by default the best resolution to obtain the best video quality on HDMI output. 7-4-4 Audio settings In the RECEIVER SETTINGS menu, select AUDIO SETTINGS.
DTR6400T_6700T_9 avril 07 EN.book Page 16 Jeudi, 10. avril 2008 2:38 14 8. INFORMATION The information contained in this menu may be requested if you contact your supplier or another service (Maintenance for example). You will thus find here information about the receiver, the embedded software, the capacity of the hard disk, as well as a utility that lets you to diagnose the signal reception of the antenna. To access the receiver technical information, press INFORMATION . .
DTR6400T_6700T_9 avril 07 EN.book Page 17 Jeudi, 10. avril 2008 2:38 14 9. EVERYDAY USE 9-1 SELECTING A TELEVISION CHANNEL 9-1-1 Using the keys and , or keys 0-9 Press the or keys to change channel or enter the number on the numeric keypad of the remote control to access the desired channel directly. You can go back to the channel previously viewed by pressing the key. 9-1-2 Using the channel list Press the key to display the channel list, select a channel then press again to confirm.
DTR6400T_6700T_9 avril 07 EN.book Page 18 Jeudi, 10. avril 2008 2:38 14 9-1-4 Detailed programme information If you want more information on the current and following programme, press the control. Press to view information on the following key of your remote L programme. M Press again or information banner.
DTR6400T_6700T_9 avril 07 EN.book Page 19 Jeudi, 10. avril 2008 2:38 14 9-5 TEMPORARY SELECTING AUDIO LANGUAGES AND SUBTITLES All modifications take place immediately. However, temporary adjustments are not retained when you change channel. 9-5-1 Using the extended information banner Press to display the extended information banner. Press Using the keys , displayed then press , or to display the options banner. , select the audio languages and the subtitles in the lists .
DTR6400T_6700T_9 avril 07 EN.book Page 20 Jeudi, 10. avril 2008 2:38 14 9-8 ELECTRONIC PROGRAMME GUIDE The electronic programme guide displays information on programmes for all the channels. This service depends on the information broadcasted by the operators. Press the key to access the electronic programme guide. You can also access the guide by pressing GUIDE . , then selecting ELECTRONIC PROGRAMME By default, the electronic programme guide is displayed in Grid mode with Video of current channel.
DTR6400T_6700T_9 avril 07 EN.book Page 21 Jeudi, 10. avril 2008 2:38 14 You can thus search all the information on the programmes broadcasted by the various channels. Depending on the channels, this information can cover the next 8 days. To help you navigate in the electronic programme guide, a yellow vertical line indicates the current time in Grid mode. Various options are available: • To select a channel/programme: use the • enter the channel number on the remote control.
DTR6400T_6700T_9 avril 07 EN.book Page 22 Jeudi, 10. avril 2008 2:38 14 main channel while keeping the same channel in the PIP window. You can select another channel using the or keys or the numeric keys. For a better view, you can move the PIP window to any corner of the screen. Select the PIP window by pressing (blue frame) and press the , , You can at any time exit the PIP mode by pressing the or keys. key. The PIP mode is not available during a recording.
DTR6400T_6700T_9 avril 07 EN.book Page 23 Jeudi, 10. avril 2008 2:38 14 9-10-3 Fast forward You can fast forward by pressing the key. On the banner, the Deferred/Live delay decreases. By pressing several times this key, you can increase the fast forward speed (up to 600 times the normal speed). If you remain in fast forward, you will eventually reach the live programme. 9-10-4 Stop You can at any time exit the Deferred mode and go back to the live programme. To do so, press the key.
DTR6400T_6700T_9 avril 07 EN.book Page 24 Jeudi, 10. avril 2008 2:38 14 10. VIDEO RECORDING The recording capacity of your receiver depends on the capacity of the hard disk and the selected programme (on average, one hour of recording requires from 2 to 2.5 GB of hard disk space). It is possible for you to simultaneously: - record a programme and watch another programme, - record two programmes and watch any one of them.
DTR6400T_6700T_9 avril 07 EN.book Page 25 Jeudi, 10. avril 2008 2:38 14 To stop a recording, return to the channel being recorded, and press the key. By pressing several times the key, you can select a recording time in 30-minute steps with a maximum duration of 4 hours (depending on software version). You can then switch off the receiver: the recording will stop automatically at the end of the programmed time.
DTR6400T_6700T_9 avril 07 EN.book Page 26 Jeudi, 10. avril 2008 2:38 14 10-2-2 Recording programme search This method allows to find a programme by the category or by the title. Press the Press key to access the main menu. Select RECORDING TIMERS then press . key. A screen is displayed in which you can choose the search options. Choose the search type (by Theme/Genre or Title) using the or keys then press . Select the category of the programme for the Theme/Genre search then press .
DTR6400T_6700T_9 avril 07 EN.book Page 27 Jeudi, 10. avril 2008 2:38 14 To modify a recording programmation, select it using the recording is locked, enter the access code and press and press or keys and press . If the to confirm. Carry out the desired modifications to confirm the new settings. 10-3 RECORDING PROGRAMMES USING THE PROGRAMME GUIDE The advantage of programming a recording using the electronic programme guide is that you can record specific programmes rather than time slots on channels.
DTR6400T_6700T_9 avril 07 EN.book Page 28 Jeudi, 10. avril 2008 2:38 14 10-3-2 Programming a recording using the programme guide Press the key to access the electronic programme guide. Select the channel and the programme to record (to know how to navigate in the guide, see “Electronic programme guide”, page 20). Once the programme is selected, press the key. The programme then appears framed in red. To cancel the programming, press the key.
DTR6400T_6700T_9 avril 07 EN.book Page 29 Jeudi, 10. avril 2008 2:38 14 10-5 MANAGING THE RECORDING LIST The coloured keys actions: let you manage the recording list, and offer you the following • : access the menu "Select the operation". • : select the highlighted recording. • : display the complete or restricted recording list. • : sort the recordings by date or name. 10-5-1 Selecting recorded programmes You can work with several recordings at the same time.
DTR6400T_6700T_9 avril 07 EN.book Page 30 Jeudi, 10. avril 2008 2:38 14 10-5-2 Accessing the complete list To display the complete list of recordings and hence access the locked recordings, press the You will be requested the access code to access the locked recordings. Enter the receiver access code then press the receiver code (access code)”, page 13). key. key (to modify the access code, see “Changing the Locked recordings are indicated by a key.
DTR6400T_6700T_9 avril 07 EN.book Page 31 Jeudi, 10. avril 2008 2:38 14 10-5-6 Moving recordings Select the recording or the folder that you want to move or select several recordings or folders (refer to the paragraph “Selecting several recordings”, page 29). Press the Select with the key. Select the "Move/New folder" action then press and . keys the desired location and press the key. Once the operation is finalised, the recording(s) appear at the new location.
DTR6400T_6700T_9 avril 07 EN.book Page 32 Jeudi, 10. avril 2008 2:38 14 10-5-9 Exporting a recording to external storage devices Attention: Such copying is legal only if it is intended for strictly private use. The size of the exported files is limited to 4 Gb on mass storage devices formatted in FAT32. Cut your recording in two parts if the size of your file exceeds 4 Gb (refer to the paragraph “Erasing a portion of a recording”, page 33).
DTR6400T_6700T_9 avril 07 EN.book Page 33 Jeudi, 10. avril 2008 2:38 14 10-5-11 Erasing a portion of a recording The receiver comprises an advanced editing function that enables you to: - erase a portion of a recording from the beginning to a point that you specify manually, - erase the portion of a recording between two points that you specify, - erase the portion of a recording between the current playing position to the end of the recording, - cut a recording into two parts.
DTR6400T_6700T_9 avril 07 EN.book Page 34 Jeudi, 10. avril 2008 2:38 14 11. MULTIMEDIA The receiver allows you to view, play and manage media files stored on the hard disk of the receiver or on compatible mass storage devices (see “USB Connection” in “Specifications”, page 45).
DTR6400T_6700T_9 avril 07 EN.book Page 35 Jeudi, 10. avril 2008 2:38 14 11-2 NAVIGATING IN THE MEDIA LIST MANAGER The media list manager displays the contents of the selected device, as well as information concerning the use of the storage space. Use the keys , to browse the files and folders in the device. If you have more than twelve files or folders use the keys , to navigate within the pages.
DTR6400T_6700T_9 avril 07 EN.book Page 36 Jeudi, 10. avril 2008 2:38 14 11-3 MANAGING CONTENTS Press the key to confirm the selection of ah highlighted media file or folder. To select several files and/or folders which are not continuous, select them and press the key for each selected element. Selected elements appear with a check-mark. To unselect an element, press again the key.
DTR6400T_6700T_9 avril 07 EN.book Page 37 Jeudi, 10. avril 2008 2:38 14 11-4 VIEWING AND MANAGING PHOTO FILES 11-4-1 Viewing photo files From the explorer, use the or the connected device. or keys to browse the contents of the hard disk of the receiver To display a photo in full screen mode, select the photo file and press the To display the photo files in thumbnail mode, press the and confirm with In thumbnail key, select the "Photo player" display mode . mode, and and key.
DTR6400T_6700T_9 avril 07 EN.book Page 38 Jeudi, 10. avril 2008 2:38 14 11-4-3 Editing photo files Select a photo file and press the key to display it in full screen mode.
DTR6400T_6700T_9 avril 07 EN.book Page 39 Jeudi, 10. avril 2008 2:38 14 To play an audio file, select it and press the key. When the audio file reaches its end, the Media list manager automatically plays the next available audio file located in the same folder. You can customise the order in which audio files are played (see “Advanced options”, page 41). Press the key to pause the audio file that is playing, press playing the audio file. Press the keys and to resume.
DTR6400T_6700T_9 avril 07 EN.book Page 40 Jeudi, 10. avril 2008 2:38 14 11-6 PLAYLISTS The media list manager allows you to create and manage customised photo slideshows, audio playlists and photo-audio playlists. 11-6-1 Creating and modifying a playlist In the Media list manager, select the folder where you wish to create your playlist. Press the "Mode" key and select the view mode "Play list Editor". The playlist edit screen is displayed.
DTR6400T_6700T_9 avril 07 EN.book Page 41 Jeudi, 10. avril 2008 2:38 14 11-6-2 Launching a playlist Select the playlist from the media list manager and press the key. Depending on the composition of the playlist, the media list manager launches: • • • an audio playback if the playlist contains only audio files, a slideshow if the playlist contains only photo files, a slideshow with audio playback as musical background if the playlist has mixed content.
DTR6400T_6700T_9 avril 07 EN.book Page 42 Jeudi, 10. avril 2008 2:38 14 12. UPDATING THE SOFTWARE Software updates of the receiver are regularly available for download to provide you with new features. The software can be updated using the network when a new version is available. In this case, the new version will be broadcasted in the channel data. The receiver automatically checks if an update is available and then asks you to accept, to postpone until the next wake up or to refuse the download.
DTR6400T_6700T_9 avril 07 EN.book Page 43 Jeudi, 10. avril 2008 2:38 14 13. TROUBLESHOOTING The remote control has no effect on the receiver. ☞ Point the remote control towards the receiver. ☞ Check the condition and the orientation of the batteries. The receiver displays - -: - -. ☞ Take the receiver out of standby by pressing The receiver cannot find any channel. ☞ Check that you are in a broadcast area. ☞ Readjust your antenna (see “Antenna signal”, page 16). Motionless image or reception problem.
DTR6400T_6700T_9 avril 07 EN.book Page 44 Jeudi, 10. avril 2008 2:38 14 A black screen (no video) appears at the end of a ☞ When a recording ends on a programme which does not programmed recording. transmit any interpretable recording video signal (Teletext feature, MHEG only feature, fixed image, switch from unscrambled to scrambled transmission, broadcast with video placeholder, etc.), the video recording stops but the time counter continues until the end of the programmed recording time.
DTR6400T_6700T_9 avril 07 EN.book Page 45 Jeudi, 10. avril 2008 2:38 14 14. SPECIFICATIONS Transmission Standards DVB-T, MPEG 2, OFDM Tuner (2 with internal splitter) RF Input Input Connector: IEC 169-2 female RF input frequency range: UHF 470-862 MHz (8 MHz BW) VHF 174-222 MHz (7 and 8 MHz BW) RF input level: -90 to -20 dBm Input impedance: 75 Ohms COFDM bandwith: 8 MHz Tuning step: 166.
DTR6400T_6700T_9 avril 07 EN.book Page 46 Jeudi, 10. avril 2008 2:38 14 15. GUARANTEE ATTENTION In order to apply the guarantee, you should contact your dealer or Sagem Communications helpdesk at 0871 07 50 710*. Proof of purchase will be required. Should any malfunctioning arise, the dealer or Sagem Communications helpdesk will advise you what to do.
DTR6400T_6700T_9 avril 07 EN.book Page 47 Jeudi, 10.
DTR6400T_6700T_9 avril 07 EN.book Page 53 Jeudi, 10. avril 2008 2:38 14 O OF FF FE ER R NNO OTT TTO OB BE EM MIIS SS SE ED D !! IIN PA AC CK K RV VIIC CE EP SE ER NF FIIN NIIT TY YS The “Infinity Service Pack STB” gives you complete peace of mind by allowing you to benefit from a 2 year warranty extension* under which we will exchange your terrestrial set-top-box at your home or work address if it develops a fault. You can take advantage of this offer** immediately on www.sagem-online.
