User's Guide

ManualsBrandsSAGE HUMAN ELECTRONICS INTERNATIONAL ManualsAutomotiveCar Bluetooth FM transmitter

BT97 105G铜版纸 80x100MM 单色四折页印刷

TALK FOCUS Wireless HANDSFREE CAR KIT

- Ensure high quality talking while freeway driving

+With QC3.0 fast charging

+With PD3.0 fast charging

User Guide

Model：BT97

1.Microphone

2.The display screen

3.Combinaon funcon

a.Noise canceling buon

b. Long press for 3S to tap to start Siri&google

4. Combinaon funcon

a. Bass booster buon

b. Long press 3S to Switch audio source

5.Phone buons: play/pause/answer/hang up/Adjust FM frequency

*Music mode: short press to play/pause

*Incoming call mode: short press to answer; long press: reject

*During a call: short press to hang up; long press: transfer to a private call

*Long press 2S: enter FM mode

6. Music mode: previous song

long press Songs fast back

7.Music mode: next song

long press Songs fast forward

8.press to turn oﬀ the ambient light

Press and hold for 3 seconds to shut down

Knob:*turn le to volume V-, turn right to volume V+

*enter FM mode: rotate CH- to the le and CH+ to the right

9.QC3.0 fast charging port (DC3.5-6.5V/3A, 6.5-9V/2A, 9-12V/1.5A)

10.Type-C charging port: Support PD3.0 (20W) charging protocol

Packaging accessories

• FM transmier*1

• Instrucon manual*1

• Air outlet bracket*1

• 3.5MM audio cable*1

• 4A fuse*1

Features:

• Adjust the local channel to the car radio channel to be consistent, which can realize SD card music

transmission to car speakers and solve the baery life charging of mobile phones and other smart

devices. Bluetooth hands-free call funcon can be realized through car audio by connecng Bluetooth

with mobile phones. Turning on the noise canceling buon during high-speed operaon can eliminate

road noise, wind noise, environmental noise, etc., and realize your high-deﬁnion call experience.

Parameter

Wireless version: V5.0

Product name：BT97

Eﬀecve distanc : 5m

Memory card format and capacity: Micro SD card, support 64G

FM frequency range : 87.5MHz-108.0MHz

Compable audio format: MP3.WMA.WAV.FLAC, APE

Compable with Bluetooth protocol: A2DP/AVRCP/HSP/HFP

Orange fast charging port: supports QC3.0 Protocol (DC 3.6-6.5V/3A, 6.5-9V/2A, 9-12V/1.5A)

Type-C port support: PD3.0 (20W) charging protocol

Product installaon

1.Put the threaded knob on the end of the air outlet bracket.

2.Insert the set of air outlet bracket into the round hole at the back of the main unit.

3.Tighten the thread

4.Open the air outlet bracket and insert it into the car air-condioning air outlet grille, ghten the

...screws to the best strength, adjust the angle of the machine, and then use it.

Power on/oﬀ

Turn on: Insert the BT97 into the cigaree lighter hole of the car. Aer the car is started, the orange

display will automacally turn on and ﬂash once per second. If it is oﬀ, long press the " " buon for

3 seconds to turn on BT97

Shutdown: Cut oﬀ the power to shut down or long press " " for 3 seconds to shut down when there is

power

Note: Even if the BT97 is turned oﬀ, the charging port can sll work normally

Screen display

1. Aer power on, the orange display shows bt and frequency ﬂashing alternately

2. Aer the pairing is successful, the screen displays bt will be on

3. Long press the " " buon to enter the frequency modulaon mode (display digital frequency)

User's guidance

1. FM and Bluetooth pairing

Note: In order to let you enjoy higher-quality music, you need to adjust the blank frequency of BT97 to

be the same as that of the car (non-local broadcast channel) when using it for the ﬁrst me. Every me

you use it, please make sure that the frequency between the transmier and your car is the same (not

the local broadcast channel).

1.1. Turn the car radio to a blank frequency point (that is, a channel without any broadcasng). The

.......reference is: clear rustling,

1.2. Long press the " " buon, the number ﬂashes to enter the FM mode, turn the knob le and

.......right to increase or decrease the frequency, and adjust to the same frequency as the car radio, such

.......as: FM88.8. Click the " " buon again or wait 3 seconds to exit the FM mode mode

1.3. Bluetooth connecon:

.......A. Aer power on, the BT97 screen displays HI, and then displays the current car baery voltage.

.......Aer 2 seconds, it enters the bt state, which means it enters the pairing state, waing for pairing

.......B. Turn on the bluetooth of the smart device, search for "BT97", then connect, aer connecng,

.......the screen displays bt long on, and you can play music via bluetooth. Usually the connecon will be

.......automacally paired but somemes it will ask you to enter a password. If prompted, enter the

.......inial password "0000".

(When used for the second me, BT97 will connect to the last device connected last me.)

①

②

④

⑥

⑧

⑤

⑨

③

⑩

QC 3.0

PD 3.0

(1).Find a blank frequency in your car radio (to ensure the sound quality of the device, please ﬁrst

select a blank channel with no local broadcast programs)

2. Bluetooth hands-free funcon

A. Answer the call: Click the " " buon.

B. Hang up the call: Click the " " buon.

C. Reject the call: long press the " " buon for 2 seconds

D. Switch private calls: Press and hold the " " buon for 2 seconds during the call.

(2). Long press " " to enter FM mode

In FM mode: Le-hand knob buon CH-

Turn the knob to the right key CH+

In music mode: Le-hand knob buon volume V-

Turn the knob to the right buon volume V+

(3). Enter Bluetooth pairing mode

Turn on the phone’s Bluetooth, search for the Bluetooth name: BT97, click connect, open the

music player, and click play to play Bluetooth music in the car.

(4).

BT97

QC 3.0

PD 3.0

How to install the fuse?

1. Rotate the screw on the boom of the Bluetooth FM transmier counterclockwise

2. Insert the fuse into the screw hole with the metal p, the metal on the edge of the fuse will be

aached to the metal p

3. Assemble the rubber gasket

4. Assemble the metal gasket

5. Turn the screw clockwise to the boom of the Bluetooth FM transmier

11. Frequently Asked Quesons (Block Diagram)

11.1. Noise issues

Soluon:

A. Reduce the volume of the speaker by one third and increase the volume of the smart device

B. Signal interference. Please switch to another empty white frequency point

C. Plug and unplug the machine again to restore the inial state and work again

3. Music funcon (please make sure the connecon is successful before use)

3.1.1 Audio source: Bluetooth/TF card

3.1.2 Music sound eﬀect: default stereo sound eﬀect playback

3.1.3 File mode: Insert a Micro SD card containing MP3 / WMA / APE / FLAC / WAV / APE ﬁles into

.........the transmier, and the transmier will automacally start playing the ﬁles. When there is an

.........incoming call, this device will automacally switch to the call.

A. Bluetooth mode: Refer to the instrucons of the smart device. Such as phone. Aer the

....Bluetooth connecon is successful, the music on the smart device can be played and

....synchronized to the car's built-in speaker

B.TF card mode: plug in TF, "BT97" will automacally recognize and play the music inside

Note: To ensure a beer experience of the product, when using this product, please select only one

audio source.

3.2. Audio source selecon

A. Used between Bluetooth and TF card, it will recognize the last connected device to play by default.

B. Auto play opon via TF card: plug and play.

C. Aer power oﬀ or restart, BT97 will enter the previous play mode (automacally play music in TF

....card mode, and manual play in Bluetooth mode is required

3.3. Audio playback operaon

A. Play/Pause: Click

B. Previous/Next: Short press " " to play the previous song, short press " " to the next song

4. High-speed noise canceling buon

4.1. During a call, click " "the buon to enter the high-speed noise cancellaon mode, and there

.......will be a Dingdong voice prompt. When talking with the other party, the noise in the car

.......environment will be suppressed, so that the person who answers the call can enjoy a clear and

.......interference-free call experience.

4.2. Click the" " buon again to exit the high-speed noise cancellaon mode

5.QC3.0 charging port descripon

5.1. The output power is 18W, compable with FCP/QC3.0/QC2.0/BC1.2/DCP, etc.

5.2. Smart devices that support QC3.0 fast charge, meet QC3.0 fast charge protocol: DC3.6-6.5V/3A,

.......6.5-9V/2A, 9-12V/1.5A.

11.2. The other party cannot hear you during a call

Reason 1: The dialing method is wrong

solve:

A. When a call comes in, click the phone buon "" to answer the call through the speaker in the car

B. Acvate the phone speaker to answer the call

Reason 2: The call volume is low

solve:

A. Increase the volume of the phone.

B. The volume of the other party is too low during the call, just ask the other party to increase the

volume.

Reason 3: The microphone is broken

Suggeson: Contact customer service for help

Friendly reminder:

Aer receiving the product, do not rush to insert the product into the cigaree lighter jack of the car.

Aer starng the car, ﬁrst turn on the idle FM radio, and paently select a blank channel with no local

programs on the car radio. The standard is a slight rustle. Then insert the product into the cigaree

lighter jack and adjust the FM frequency of the product to be the same as the FM frequency of the car.

At this me, the car radio will be very quiet and there will be no stac electricity interference. (If it is

sll not quiet, please try to ﬁnd a new blank channel again), and ﬁnally connect to your phone via

wireless. When they are successfully paired, you can listen to songs on your phone and make

hands-free calls on your phone.

8.1 Adjust the direcon of the BT97 unl he is directly facing the driver

8.2 Press the buon during the call, (when you hear the Dingdong tone, turn on the road noise reducon

......mode)

9. Schemac diagram of fuse replacement

*Highly developed security

*Innovave fuse tube design and replaceable

*It can protect your car and car charger in case of overcurrent.

* Comes with a spare fuse

6.Type-C charging port descripon

6.1. Output power 20W, support PD3.0 fast charging protocol

6.2. Smart devices that support PD3.0 protocol, meet DC 5V/3A, 9V/2.22A, 12V/1.67A output

7. Acvate the voice assistant funcon

7.1 Support Siri and Google Assistant voice assistant wake-up

7.2 Press and hold the" " buon for 2 seconds to wake up under Bluetooth connecon

8.8.How to ensure high-quality calls when driving on the highway

Detailed accessories

● Metal washers

● Fuse

● Rubber gasket

● Metal p screws

Summary of content (2 pages)

PAGE 1
BT97 105G铜版纸 80x100MM 单色四折页印刷 Packaging accessories • FM transmitter*1 • Instruction manual*1 • Air outlet bracket*1 • 3.5MM audio cable*1 • 4A fuse*1 TALK FOCUS Wireless HANDSFREE CAR KIT - Ensure high quality talking while freeway driving ① +With QC3.0 fast charging ③ ⑤ ⑥ +With PD3.
PAGE 2
Federal Communications Commission (FCC) Statement. This device complies with part 15 of the FCC Rules. Operation is subject to the following twoconditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.