SAG0255IW USER MANUAL 5¼” In-Wall LCR Speaker with SpeedLock™ Technology Luxury Edition LUXURY EDITION
page 2 INTRODUCTION Welcome to the Saga Sound experience! Our Luxury Edition audio line brings performance and luxury together. Engineered to outperform anything on the market, our Luxury Edition line delivers chic products that will add a touch of elegance to any audio system out there. This 5¼" In-Wall Speaker features our patented SpeedLock™ Technology for simple Push & Go installation.
page 3 INSTALLATION This speaker features our patented SpeedLock™ Technology for simple Push & Go installation. Simply set the SpeedLock™ tabs and push the speaker into place. Toss on the magnetic grille for a quick and easy install. Determine the desired speaker placement and trace around the included cut-out template. In order to set the SpeedLock™ tabs to the UNLOCKED position, push the key in and turn counter-clockwise. Use a drywall saw to cut the hole for the speaker. Push the speaker into place.
page 4 CONNECTION Route the speaker wire from the source to the speaker. Separate about 4” of speaker wire at each conductor end. Using a wire stripper, remove about 1/4” (6mm) of insulation from each wire. Twist the ends of each wire to prevent fraying. Connect the marked wire to the red speaker terminal by pressing the release tab, inserting the wire into the hole, and then releasing the tab. Repeat to connect the unmarked wire to the black terminal.
page 5 SPEAKER REMOVAL SpeedLock™ Tab Using both hands, remove the speaker from the wall. Use the key to slightly turn the mounting tab until the SpeedLock™ trigger snaps down. Remove the magnetic grille to reveal the mounted speaker. Use the included key to push and rotate the SpeedLock™ tabs counter-clockwise back into the unlocked position. SpeedLock™ Trigger Be sure all the SpeedLock™ tabs and SpeedLock™ triggers are fully reset in order to re-install the speaker.