INTRODUCTION Welcome to the Saga Sound experience! The Saga Contractor Series Speakers are an economical choice for dens, kitchens, bathrooms, or patios. So when you need a quality speaker for less, Saga has you covered. The Contractor Series is the perfect choice for easy listening in Residential or Commercial areas. The discrete, compact format of this speaker makes it ideal for many applications where traditional speakers would be impractical or impossible.
INSTALLATION This speaker features classic “dog ear” mounting tabs. Simply screw the tabs down to keep the speaker in place. Allow at least 1%" of clearance between the cut out and any studs or joists for the mounting hardware to work properly. A mounting depth of 3.46" measured from the face of the wall is also required.
CONNECTION ‘When connecting your in-ceiling speaker, it is very important to retain the correct polarity. To do this, be sure that the wire attached to the red, positive, or hot terminal on the speaker connects to the red, positive or hot terminal on the source component. Similarly, the black, negative or ground terminal on the speaker must connect to black, negative or ground terminal on the source component.