User Manual

6½” 2-Way In-Ceiling Speaker

SAG8026IC USER MANUAL

ELITE SERIES

Elite

PAGE 1
SAG8026IC USER MANUAL 6½” 2-Way In-Ceiling Speaker Elite ELITE SERIES
PAGE 2
page 2 INTRODUCTION Welcome to the Saga Sound experience! We don't call this series "Elite" for nothing. Our Elite Series audio line boast components and craftsmanship ideal for extraordinary sound performance. You don’t have to spare design for quality with the Elite Series. The discrete, compact format of this speaker makes it ideal for many applications where traditional speakers would be impractical or impossible.
PAGE 3
page 3 INSTALLATION This speaker features classic “dog ear” mounting tabs. Simply screw the tabs down to keep the speaker in place. Allow at least 1½” of clearance between the cut out and any studs or joists for the mounting hardware to work properly. A mounting depth of 3.46” measured from the face of the wall is also required. The speaker location and associated mounting hardware should not conflict with any existing wires or pipes.
PAGE 4
page 4 CONNECTION When connecting your in-ceiling speaker, it is very important to retain the correct polarity. To do this, be sure that the wire attached to the "+" , red, positive, or hot terminal on the speaker connects to the "+", red, positive or hot terminal on the source component. Similarly, the "-", black, negative or ground terminal on the speaker must connect to the respective "-", black, negative or ground terminal on the source component.