Wireless Network Video Recorder System User Manual H.264 wireless P2P NVR HD-OUT PWR HDD SYS H.264 2PCS/4PCS/6PCS/8PCS 960P/1080P 2CH/4CH/6CH/8CH NVR Kits V.
Package Contents Thank you for choosing Safevant product. Here is the list for product and relevant accessories. S/N Item Quantity 1 NVR 1pc 2 IP Camera(2CH/4CH/6CH/8CH) 2/4/6/8 pcs 3 DC 12V/2A power supply(for NVR)-3.3 feet 1pc 4 DC 12V/1A power supply(for IP Camera)-10 feet 2/4/6/8 pcs 5 3.3 Feet network cable 1pc 6 USB mouse 1pc 7 4 Screws for HDD (only for systems without HDD) 1bag 8 User manual 1pc How can I get tech support? Email:safevantservice@hotmail.
1 Installing your Network Video Recorder System Getting Started Before you begin installation, be sure to have the following: PC or TV monitor VGA or HDMI cable Router (WAN) Hard drive.If you purchased the system without hard drive, you must first install it. If you do not have a hard drive, you will not be able to record and playback video. Please see below for hard drive installation instructions Do not attempt to install your cameras until you are able to view images on your TV or PC monitor first.
Installing the System Connect the NVR and cameras with power adapters provided. Attach the anten nas to the cameras, connect the mouse to the NVR. (Please note, power supply for NVR box is 12V-2000mA) Connect the PC or TV monitor to the NVR with a VGA or HDMI cable. You must use a PC or TV monitor, you cannot connect to a laptop. Connect the Router LAN Port to NVR WAN Port with Network Cable Provided. The router must be WAN(Wide Area Network).
2 Check NVR Network, Change NVR system login password Once you have completed connecting the NVR, wait approximately 2-3 minutes. Next you will see the window below on your monitor screen. No password is necessary, click ok to continue. Right click on the home screen of your monitor, navigate to System setup > System admin, click User on the left menu bar > Set password (Request: 6-10 Characters of at least two types, such as abc123).
If you need to remote view on your mobile or pc, pls ensure that your nvr box connects to router with Ethernet cable. Please go to System setup > Network setup. In the middle of the window you should see Cloud status is ONLINE and Network Status is Healthy Network. Please ensure that you tick DHCP, Cloud, Net Diagnose Info Enable as shown in the figure below. Click ok.
3 Viewing on your SmartPhone From your Smartphone, go to the App store or Google play Download “IP PRO” . Ceate an account and password.Be sure to remember your account login info.#Pic 1 Click "+", then click Add a video recorder.#Pic2 On your device, either scan the QR code or manually enter your Cloud ID. You can locate your Cloud ID on your monitor screen (Go to system setup>network setup), (Use NVR login Username/password on your monitor screen here).
4 Viewing your system on your computer or laptop by CMS software If you need to remote view on computer of Windows or Mac, pls go to www.safevantcctv.com to download CMS software. Or email us at safevantservice@hotmail.com so that we can send you link to download. 5 Record Video If the model you bought without HDD, please firstly purchase 3.5 inch SATA interface HDD and install it inside NVR box.
Right click on the home screen of your monitor and navigate to System setup > Record Setup again, click Copy to, check All, Click Ok. Copy the same setting of Channel 1 for the remaining channels. For motion records only, just tick the green Motion only from the manual bar, 6 Playback Video To use the playback feature, you must first set up the recording function as described in the section above. To playback, from the home screen of your monitor, right click and navigate to Video playback.
7 Backup Video From the home screen of monitor, right click the mouse, navigate to Video backup, select Channel, Or on the Video playback page, select date, channels, select certain time, then click Search and select the files you want to back up, click Backup. Next, click Yes, remove your mouse directly and insert USB storage in one minute,then wait for the system to perform the back-up.
3) Email Alert setup:pls refers FAQ about how can get email notifications for motion detection. 9 Frequently Asked Questions Q:How do I format my new hard drive and check my hard drive information? A:From the home screen of your monitor, right click the mouse, navigate to System setup > General setup > HDD Setup, select Format and click Format > click Ok.
Q:Do I need to connect the camera with network cable? A:No, the cameras are wireless. You do, however, need to connect the camera with a power supply. The cameras and NVR are already paired. The camera will connect with the NVR automatically once attached to a power supply. Do not attempt to install your cameras until you are able to view images on your TV or PC monitor first.
After you have finished setting your preferred channel as outlined above, repeat the process for your remaining preferred channels. Starting from the home screen of your monitor, right click the mouse, navigate to System setup > Channel Setup > Video detection. Next, select Copy to and either select the All option for all cameras, or you can select the specific channel(s) you prefer. Click ok.You can adjust the sensitivity at any time by returning to this screen.
From the home screen of your monitor, right click your mouse and navigate to System Setup, select Network setup, select Email from the left menu bar. From there, click Enable, enter the information in the fields as shown in the figure below. For the dot, please be sure to use the correct key on the keyboard next to the forward slash as shown in this figure: Complete the fields on the screen as follows(take hotmail account as an example): SMTP Server: smtp-mail.outlook.
After you have entered all of your information, click Test until the Test success message appears on the screen. Please allow a few minutes for the testing cycle to complete. If the test failed, try another Email account.Click Ok. Whether or not your test was successful, be sure to click Ok to save your settings. To test your alarm, walk past your camera. You will receive an Email notification within 2 to 3 minutes as shown in the sample figure below.
Q: How can I strengthen the wireless signal? A: Adjust the direction of the antennas as shown in the figure below Best wireless signal Worst wireless signal Please contact us at safevantservice@hotmail.com so that we can send Instruction about Repeater function or purchase long antennas for cameras to boost wifi Q:How do I adjust the Date and Time? A: First way: Verify that your system is healthy network. Right click the mouse, navigate to System setup>Network Setup.
Q:What is best temperature for the cameras to operate at their optimum level? A: Select a location for the camera that has an ambient temperature ranging from -50 degrees Fahrenheit to 122 degrees Fahrenheit. Q:How do restore my unit to the Factory Settings? A: Right click the mouse, please navigate to System setup > System admin > Factory setting, un-tick wifi setup and network setup, click ok.
Q:Camera showing IPC Disconnect on Video manage page? A: 1) check if IR CUT light turns red or not when power on camera and cover the photocell (refer to troubleshooting camera issue ) 2)if it turns red, it means camera is fine, move this camera near to nvr box to check whether there is image on monitor. Since wifi range depends on its distance and obstruction between cameras and nvr box. 3) if camera is working fine and near to nvr box, still no image, camera needs to match code.
How can I get tech support? Email:safevantservice@hotmail.com Skype ID:safeskysales008 US Toll Free:18889599866 (available after 5:00 pm Pacific time) CA Toll free 18884232549 (available after 5:00 pm Pacific time) Website: www.safevantcctv.
V.
