Wireless Network Video Recorder System User Manual wireless P2P NVR HD-OUT P WR HDD SYS 4PCS/8PCS 1080P Cameras 8CH NVR Kits V3.0.7.
Package Contents :NGTQ _U[ LUX INUUYOTM 9',+<'4: VXUJ[IZ Here is the list for product and relevant accessories. S/N Item Quantity 1 NVR 1pc 2 IP Camera 4/8 pcs 3 DC 12V/2A power supply(for NVR)-3.3 feet 1pc 4 DC 12V/1A power supply(for IP Camera)-10 feet 4/8 pcs 5 3.3 Feet network cable 1pc 6 USB mouse 1pc 7 4 Screws for HDD (only for systems without HDD) 1bag 8 User manual 1pc How can I get tech support? Email:service@clocktida.
1 Installing your Network Video Recorder System Getting Started Before you begin installation, be sure to have the following: PC or TV monitor VGA or HDMI cable Router (WAN) Hard drive. (If you purchased a system with a pre-installed hard drive,please ignore it.However if the system you purchased is without hard drive,please install hard drive inside the nvr box for recording.Please help check the following instructions about how to install a hard drive.If needed,please contact us at service@clocktida.
Installing the System Connect the NVR and cameras with power adapters provided. Connect the mouse to the NVR. (Please note, power supply for NVR box is 12V-2000mA) Connect the PC or TV monitor to the NVR with a VGA or HDMI cable. Laptop or All-in-one computer NOT supported. Connect the Router LAN Port to NVR WAN Port with Network Cable Provided. The router must be WAN(Wide Area Network). NOTE: Antenna already has been screwed into the camera, please DO NOT unscrew it. Otherwise camera will be broken.
2 Change NVR system login password and Check NVR Network Once you have completed connecting the NVR, wait approximately 2-3 minutes. Next you will see the window below on your monitor screen. NO Password, click ok to continue. Right click on the home screen of your monitor, navigate to System setup > System admin, click User on the left menu bar > Set password (Request: 6-10 Characters of at least two types, such as abc123). Create a password and type it in the field, repeat new password, click ok.
If you need to remote view on your mobile or pc, please ensure that your nvr box connects to router with Ethernet cable. Please go to System setup > Network setup. Please ensure that you check DHCP on, then you should see Network Status must be Healthy Network.You should see cloud ID on the right side.
Click network icon at the bottom right side of main screen > you should see page of Fast network. Once Cloud(P2P) is “Online”, you will be able to access videos from the cameras remotely by PC or Smart Phone (More on this in the next Section of this manual). If the system does not come “Online” please do the following: 1.Make sure the light at the network port of the NVR is flashing which indicates active communication with the router. Re-seat or replace the cable if necessary. 2.
07
3 Viewing on your SmartPhone From your Smartphone, go to the App store or Google play to Download “Eseecloud” or “IP Pro” . Click Register&Create an account and password to log in.Be sure to remember your account login. Or Local experience. Click "+", then scan the QR code or other ways to add,then go to “Kits”. On your device, either scan the QR code or manually enter your Cloud ID.
4 Viewing your system on your computer or laptop by CMS software If you need to remote view on computer of Windows or Mac, please go to www.safevantcctv.com to download CMS software. Or email us at service@clocktida.com so that we can send you a link to download. 5 Record Video If the model you bought without HDD, please firstly purchase 3.5 inch SATA interface HDD and install it inside NVR box.
Right click on the home screen of your monitor and navigate to System setup > Record Setup >record plan again, click Copy to, check All, Click Ok. Copy the same setting of Channel 1 for the remaining channels. For motion records only, just tick the green Motion only from the manual bar. 6 Playback Video To use the playback feature, you must first set up the recording function as described in the section above. To playback, from the home screen of your monitor, right click and navigate to Video playback.
7 Backup Video From the home screen of monitor, right click the mouse, navigate to Video backup, select Channel. Or on the Video playback page, select date, channels, select certain time, then click Search and select the files you want to back up, click Backup. Then remove your mouse directly and insert USB storage in one minute,then wait for the system to perform the back-up.
3) Email Alert setup:please refer to FAQ about how can get email notifications for motion detection. 9 Frequently Asked Questions Q:How do I format my new hard drive and check my hard drive information? A:From the home screen of your monitor, right click the mouse, navigate to System setup > General setup > HDD Setup, select Format and click Format > click Ok.
Q:Do I need to connect the camera with network cable? A:No, the cameras are wireless. You do, however, need to connect the camera with a power supply. The cameras and NVR are already paired. The camera will connect with the NVR automatically once attached to a power supply. Do not attempt to install your cameras until you are able to view images on your TV or PC monitor first.
After you have finished setting your preferred channel as outlined above, repeat the process for your remaining preferred channels. Starting from the home screen of your monitor, right click the mouse, navigate to System setup > Channel Setup > Video detection. Next, select Copy to and select the All option for all cameras, or you can select the specific channel(s) you prefer. Click ok.You can adjust the sensitivity at any time by returning to this screen.
From the home screen of your monitor, right click your mouse and navigate to System Setup, select Network setup, select Email from the left menu bar. From there, click Enable, enter the information in the fields as shown in the figure below. For the dot, please be sure to use the correct key on the keyboard next to the forward slash as shown in this figure: Complete the fields on the screen as follows(take hotmail account as an example): SMTP Server: smtp-mail.outlook.
After you have entered all of your information, click Test until the Test success message appears on the screen. Please allow a few minutes for the testing cycle to complete. If the test failed, try another Email account.Click Ok. No matter whether your test was successful or not, be sure to click Ok to save your settings. To test your alarm, walk past your camera. You will receive an Email notification within 2 to 3 minutes as shown in the sample figure below.
Q: How can I strengthen the wireless signal? A: Adjust the direction of the antennas as shown in the figure below Best wireless signal Worst wireless signal Please contact us at service@clocktida.com so that we can send Instruction about Repeater function or purchase long antennas for cameras to boost wifi signal. Q:How do I adjust the Date and Time? A: First way: Verify that your system is healthy network. Right click the mouse, navigate to System setup>Network Setup.
Q:What is best temperature for the cameras to operate at their optimum level? A: Select a location for the camera that has an ambient temperature ranging from -50 degrees Fahrenheit to 122 degrees Fahrenheit. Q:How do restore my unit to the Factory Settings? A: Right click the mouse, please navigate to System setup > System admin > Factory setting>Simple restore,then click ok.
Q:Camera showing IPC Disconnect or Connect fail on Video manage page? A: 1) check if IR CUT light turns red or not when power on camera and cover the photocell (refer to troubleshooting camera issue ) 2)if it turns red, it means camera is fine, move this camera near to nvr box to check whether there is image on monitor. Since wifi range depends on its distance and obstruction between cameras and nvr box. 3) if camera is working fine and near to nvr box, still no image, camera needs to match code.
How can I get tech support? Email:service@clocktida.com Skype ID:safeskysales008 US Toll Free:1-888-959-9866 (available after 5:00 pm Pacific time) CA Toll free 1-888-423-2549 (available after 5:00 pm Pacific time) Website: www.safevantcctv.
V3.0.7.
