Instructions for Use

SAFEVANT Wireless Security Camera System Website: www.safevantcctv.com

USA: 1-888-959-9866 CA: 1-888-423-2549 Skype: safeskysales008 E-mail: safevantservice@hotmail.com

Dear Valued Customer,

This is Fiona Lee, the manager of SAFEVANT. Hope everything goes well with you.

Thanks for opening this instruction manual which is including videos and written notes for

SAFEVANT wireless security camera system. Hopefully it’s helpful.

If any questions, please feel free to contact us as the following contact methods. Our Customer

Service Team and Tech Support Team will follow up your issue and make you happy.

Toll free to: 1-888-959-9866(USA)

1-888-423-2549(CA)

Skype: safeskysales008

E-mail: safevantservice@hotmail.com

Website: www.safevantcctv.com

SAFEVANT Wireless Security Camera System Connection

Video link:

https://www.youtube.com/watch?v=JXqsZXgsMww

Please note:

a. The power supply for the NVR box is different from those for cameras. The specification of the power cord must be

DC 12V 2000mA, or else the hard drive won’t be found successfully by the system.

b. After connection, if the monitor screen is black and saying “no signal”, please try to hold the left button of your

mouse and do not let it go until you can hear something like “beep” from the NVR box. If the solution didn’t help,

please switch another PC monitor or TV monitor. It might be the resolution issue.

How To Back up Video

Video link:

https://www.youtube.com/watch?v=9sqrgzhIaKo

Please note:

It requires a USB thumb drive to backup the footage you want. The specification of the thumb drive should be from

8GB to 64GB.The Format of USB drive is FAT 32.

How To Use Wifi Extender

Video link:

https://www.youtube.com/watch?v=fL-JsS2tmQk

Please note:

Only SAFEVANT wifi extender can work with SAFEVANT cameras.

Regarding to different version wifi booster, some of them may not say “match code is running”, “match code

succeed” on the wifi extender during matching. It is normal.

Playback Match code Install HDD Format

Video link:

https://www.youtube.com/watch?v=KDsLGfa36hs

Please note:

a. If you want to restore a camera into factory setting, please follow the instruction below:

--Please go to video manage, please delete the IP address of this camera.

--Then please connect this camera to the NVR box by network cable directly, at the same time, we need to power on

PAGE 1
SAFEVANT Wireless Security Camera System Website: www.safevantcctv.com Dear Valued Customer, This is Fiona Lee, the manager of SAFEVANT. Hope everything goes well with you. Thanks for opening this instruction manual which is including videos and written notes for SAFEVANT wireless security camera system. Hopefully it’s helpful. If any questions, please feel free to contact us as the following contact methods. Our Customer Service Team and Tech Support Team will follow up your issue and make you happy.
PAGE 2
SAFEVANT Wireless Security Camera System Website: www.safevantcctv.com this camera. --Then please go to video manage, please click refresh or search button. Then you will see the ip address of this camera. -- Please highlight this IP address, then go to modify, please click factory reset, it will be ok. b. If the system you bought is without hard drive, please kindly note that the specification of hard drive should be 2.5inch/3.5 inch, SATA interface, internal, Max.