User's Manual

— 1 —
— 2 — — 3 —
Safety Technology International, Inc.
2306 Airport Rd • Waterford, MI 48327
Phone: [phone] • Fax: [phone]
[e-mail] • www.sti-usa.com
Safety Technology International (Europe) Ltd.
Unit 49G Pipers Road • Park Farm Industrial Estate • Redditch
Worcestershire • B98 0HU • England • Tel: [phone]
Fax: [phone] • Freephone: 0800 085 1678 (UK only)
[e-mail] • www.sti-europe.com
Inst. Sht. WirelessDriveway APRIL2010
Installation and Operation Manual
STI Wireless Driveway Monitor
TM
Thank you for purchasing this ne product. We want you to know your satisfaction is very
important to us. We suggest you take the time to read this manual carefully to get the most
from your new product.
HOW THE PRODUCT WORKS
Because of its patented magnetometer SENSOR system, the Driveway Monitor will only
be triggered by cars or trucks - not people, animals and so forth. When a vehicle passes
the Motion Alert
®
SENSOR next to the driveway, the RECEIVER unit inside the ofce or
home sounds a chime and ashes the alert light. The alert light will continue to ash until
reset and the RECEIVER will continue to chime each time a vehicle passes. The earth has
a uniform magnetic eld around it. A vehicle creates a slight disturbance in the earth’s eld.
The SENSOR detects this disturbance and transmits a signal to the RECEIVER.
BEFORE YOU START
Refer to this drawing to become familiar with all the parts.
STI-30104
LAMP CONTROLLER
(OPTIONAL)
AC ADAPTER
GREEN
LED
75 mA
OUTPUT
RECEIVER ANTENNA
SPEAKER
STI-34104
INDOOR RECEIVER
BUTTON
RED LED
TRANSMITTER CAP
BATTERY / CIRCUIT
BOARD HOLDER
TRANSMITTER BASE
MOUNTING
TUBE CAP
WALL MOUNT
2 “C” BATTERIES
TRANSMITTER
CIRCUIT BOARD
MOUNTING TUBE
MOUNTING STAKE
TRANSMITTER CAP
TRANSMITTER
MOUNTING
TUBE CAP
MOUNTING TUBE
MOUNTING STAKE
WALL MOUNT
TRANSMITTER CAP
SCREWS
RECHARGEABLE
NiMH BATTERIES
H
L
SENSITIVITY JUMPERS
(SOLAR TYPE)
SENSITIVITY JUMPERS
(BATTERY TYPE)
H
L
FINGER
NOTCHES
REMOVE PLASTIC TAB
FROM BATTERIES
DRIVEWAY
3’OR
LESS
25' OR MORE
PLACE SENSOR 3' OR
LESS FROM EDGE OF
DRIVEWAY AND 25' OR
MORE FROM STREET.
12’
MAX
DRIVEWAY
PLACE SENSOR
3' OR LESS FROM
EDGE OF DRIVEWAY
AND 25+ FEET OR
MORE FROM STREET.
25' OR MORE
3' OR
LESS
12'
MAX
+
+
-
B
DETAIL B
SCALE 2:1
B
C
H
L
-
+
+
-
B
-
BATTERY POWERED SENSOR
SOLAR POWERED SENSOR
STI-34150 Battery Power Kit
STI-34100 Solar Power Kit
STI-30104
LAMP CONTROLLER
(OPTIONAL)
AC ADAPTER
GREEN
LED
75 mA
OUTPUT
RECEIVER ANTENNA
SPEAKER
STI-34104
INDOOR RECEIVER
BUTTON
RED LED
TRANSMITTER CAP
BATTERY / CIRCUIT
BOARD HOLDER
TRANSMITTER BASE
MOUNTING
TUBE CAP
WALL MOUNT
2 “C” BATTERIES
TRANSMITTER
CIRCUIT BOARD
MOUNTING TUBE
MOUNTING STAKE
TRANSMITTER CAP
TRANSMITTER
MOUNTING
TUBE CAP
MOUNTING TUBE
MOUNTING STAKE
WALL MOUNT
TRANSMITTER CAP
SCREWS
RECHARGEABLE
NiMH BATTERIES
H
L
SENSITIVITY JUMPERS
(SOLAR TYPE)
SENSITIVITY JUMPERS
(BATTERY TYPE)
H
L
FINGER
NOTCHES
REMOVE PLASTIC TAB
FROM BATTERIES
DRIVEWAY
3’OR
LESS
25' OR MORE
PLACE SENSOR 3' OR
LESS FROM EDGE OF
DRIVEWAY AND 25' OR
MORE FROM STREET.
12’
MAX
DRIVEWAY
PLACE SENSOR
3' OR LESS FROM
EDGE OF DRIVEWAY
AND 25+ FEET OR
MORE FROM STREET.
25' OR MORE
3' OR
LESS
12'
MAX
+
+
-
B
DETAIL B
SCALE 2:1
B
C
H
L
-
+
+
-
B
-
STI-30104
LAMP CONTROLLER
(OPTIONAL)
AC ADAPTER
GREEN
LED
75 mA
OUTPUT
RECEIVER ANTENNA
SPEAKER
STI-34104
INDOOR RECEIVER
BUTTON
RED LED
TRANSMITTER CAP
BATTERY / CIRCUIT
BOARD HOLDER
TRANSMITTER BASE
MOUNTING
TUBE CAP
WALL MOUNT
2 “C” BATTERIES
TRANSMITTER
CIRCUIT BOARD
MOUNTING TUBE
MOUNTING STAKE
TRANSMITTER CAP
TRANSMITTER
MOUNTING
TUBE CAP
MOUNTING TUBE
MOUNTING STAKE
WALL MOUNT
TRANSMITTER CAP
SCREWS
RECHARGEABLE
NiMH BATTERIES
H
L
SENSITIVITY JUMPERS
(SOLAR TYPE)
SENSITIVITY JUMPERS
(BATTERY TYPE)
H
L
FINGER
NOTCHES
REMOVE PLASTIC TAB
FROM BATTERIES
DRIVEWAY
3’OR
LESS
25' OR MORE
PLACE SENSOR 3' OR
LESS FROM EDGE OF
DRIVEWAY AND 25' OR
MORE FROM STREET.
12’
MAX
DRIVEWAY
PLACE SENSOR
3' OR LESS FROM
EDGE OF DRIVEWAY
AND 25+ FEET OR
MORE FROM STREET.
25' OR MORE
3' OR
LESS
12'
MAX
+
+
-
B
DETAIL B
SCALE 2:1
B
C
H
L
-
+
+
-
B
-
INDOOR RECEIVER STI-34104
(Receives up to 4 different STI sensors)
Install batteries into the TRANSMITTER
1. Remove the TRANSMITTER cap by turning it counterclockwise.
2. WITHOUT PULLING ON THE BRASS ANTENNA OR ANY
WIRES, grasp the outside of the battery/circuit board holder
by the nger notches, twist gently and pull out. Insert two “C”
alkaline batteries (not included).
3. Replace the battery/circuit board holder and TRANSMITTER
cap.
4. Place the TRANSMITTER on a table or counter approximately
5-10 ft. away from you. TRANSMITTER may make a faint
clicking noise - this is normal.
STI-30104
LAMP CONTROLLER
(OPTIONAL)
AC ADAPTER
GREEN
LED
75 mA
OUTPUT
RECEIVER ANTENNA
SPEAKER
STI-34104
INDOOR RECEIVER
BUTTON
RED LED
TRANSMITTER CAP
BATTERY / CIRCUIT
BOARD HOLDER
TRANSMITTER BASE
MOUNTING
TUBE CAP
WALL MOUNT
2 “C” BATTERIES
TRANSMITTER
CIRCUIT BOARD
MOUNTING TUBE
MOUNTING STAKE
TRANSMITTER CAP
TRANSMITTER
MOUNTING
TUBE CAP
MOUNTING TUBE
MOUNTING STAKE
WALL MOUNT
TRANSMITTER CAP
SCREWS
RECHARGEABLE
NiMH BATTERIES
H
L
SENSITIVITY JUMPERS
(SOLAR TYPE)
SENSITIVITY JUMPERS
(BATTERY TYPE)
H
L
FINGER
NOTCHES
REMOVE PLASTIC TAB
FROM BATTERIES
DRIVEWAY
3’OR
LESS
25' OR MORE
PLACE SENSOR 3' OR
LESS FROM EDGE OF
DRIVEWAY AND 25' OR
MORE FROM STREET.
12’
MAX
DRIVEWAY
PLACE SENSOR
3' OR LESS FROM
EDGE OF DRIVEWAY
AND 25+ FEET OR
MORE FROM STREET.
25' OR MORE
3' OR
LESS
12'
MAX
+
+
-
B
DETAIL B
SCALE 2:1
B
C
H
L
-
+
+
-
B
-
STI-30104
LAMP CONTROLLER
(OPTIONAL)
AC ADAPTER
GREEN
LED
75 mA
OUTPUT
RECEIVER ANTENNA
SPEAKER
STI-34104
INDOOR RECEIVER
BUTTON
RED LED
TRANSMITTER CAP
BATTERY / CIRCUIT
BOARD HOLDER
TRANSMITTER BASE
MOUNTING
TUBE CAP
WALL MOUNT
2 “C” BATTERIES
TRANSMITTER
CIRCUIT BOARD
MOUNTING TUBE
MOUNTING STAKE
TRANSMITTER CAP
TRANSMITTER
MOUNTING
TUBE CAP
MOUNTING TUBE
MOUNTING STAKE
WALL MOUNT
TRANSMITTER CAP
SCREWS
RECHARGEABLE
NiMH BATTERIES
H
L
SENSITIVITY JUMPERS
(SOLAR TYPE)
SENSITIVITY JUMPERS
(BATTERY TYPE)
H
L
FINGER
NOTCHES
REMOVE PLASTIC TAB
FROM BATTERIES
DRIVEWAY
3’OR
LESS
25' OR MORE
PLACE SENSOR 3' OR
LESS FROM EDGE OF
DRIVEWAY AND 25' OR
MORE FROM STREET.
12’
MAX
DRIVEWAY
PLACE SENSOR
3' OR LESS FROM
EDGE OF DRIVEWAY
AND 25+ FEET OR
MORE FROM STREET.
25' OR MORE
3' OR
LESS
12'
MAX
+
+
-
B
DETAIL B
SCALE 2:1
B
C
H
L
-
+
+
-
B
-
1. Remove the bottom of the TRANSMITTER by removing the 3
screws on the bottom of the unit.
2. Remove the plastic tab between the batteries.
3. Replace the bottom of the unit and tighten down with the 3
screws.
4. Place the TRANSMITTER in direct sunlight for 48 hours
OR place batteries in a NiMH (nickel metal hydride) battery
charger.
SOLAR POWERED:
BATTERY POWERED:
STI-30104
LAMP CONTROLLER
(OPTIONAL)
AC ADAPTER
GREEN
LED
75 mA
OUTPUT
RECEIVER ANTENNA
SPEAKER
STI-34104
INDOOR RECEIVER
BUTTON
RED LED
TRANSMITTER CAP
BATTERY / CIRCUIT
BOARD HOLDER
TRANSMITTER BASE
MOUNTING
TUBE CAP
WALL MOUNT
2 “C” BATTERIES
TRANSMITTER
CIRCUIT BOARD
MOUNTING TUBE
MOUNTING STAKE
TRANSMITTER CAP
TRANSMITTER
MOUNTING
TUBE CAP
MOUNTING TUBE
MOUNTING STAKE
WALL MOUNT
TRANSMITTER CAP
SCREWS
RECHARGEABLE
NiMH BATTERIES
H
L
SENSITIVITY JUMPERS
(SOLAR TYPE)
SENSITIVITY JUMPERS
(BATTERY TYPE)
H
L
FINGER
NOTCHES
REMOVE PLASTIC TAB
FROM BATTERIES
DRIVEWAY
3’OR
LESS
25' OR MORE
PLACE SENSOR 3' OR
LESS FROM EDGE OF
DRIVEWAY AND 25' OR
MORE FROM STREET.
12’
MAX
DRIVEWAY
PLACE SENSOR
3' OR LESS FROM
EDGE OF DRIVEWAY
AND 25+ FEET OR
MORE FROM STREET.
25' OR MORE
3' OR
LESS
12'
MAX
+
+
-
B
DETAIL B
SCALE 2:1
B
C
H
L
-
+
+
-
B
-
Set up the RECEIVER and program the TRANSMITTER:
1. Plug the antenna into the back of the RECEIVER.
2. Plug the AC adapter into the back of the RECEIVER and into the wall outlet.
3. RECEIVER will make a start up tone and the green LED will ash.
4. Push and hold the button on the RECEIVER until you hear a second beep (approximately
3 seconds) then let go of the button.
5. Red LED will be solid YOU NOW HAVE 60 SECONDS TO COMPLETE PROGRAMMING.
6. Pick up the TRANSMITTER and rotate it until the green LED on the RECEIVER ashes
and the RECEIVER makes a short tone. (If you have an additional TRANSMITTER(s),
repeat this step while RECEIVER is still in Programming Mode.)
7. Place TRANSMITTER onto counter or table.
8. Press and release the button on the RECEIVER (red LED should now be off).
9. Rotate the TRANSMITTER again until the green LED ashes and the RECEIVER makes
the alert tone.
CONGRATULATIONS! You are now ready to install the TRANSMITTER. If for any reason
your RECEIVER does not respond correctly to above steps please see “Clearing the
RECEIVER.” Follow those steps and return to “Set up the RECEIVER and program the
TRANSMITTER” above. Or, call STI Support at 800-888-4784.
Install the TRANSMITTER:
The Solar unit must be placed in an area that receives partial or full sunlight. For both
models, be sure the location of the TRANSMITTER is at least 25’ back from the main road.
For a typical 12’ wide driveway, it is recommended the TRANSMITTER be no more than
3’ away from the driveway (see drawing). Additional TRANSMITTERS may be required
for driveways exceeding 12’. TRANSMITTER may be placed up to 1,000 feet away from
RECEIVER; however, range may vary depending upon environment and use of wireless
telephones, wireless routers and other similar devices.