Quick Start Guide

The SABRE Module offers a quick Bluetooth
mobile access upgrade for legacy readers with
a Hirose connector.*
Remove the mounting screw at the bottom of
the reader.
Once the screw is removed pull the reader out
and up to remove it from the wall mount bracket.
The Hirose connector is
hidden behind black
electrical tape. By peeling the tape the
connector will become accessible.
The SABRE module has a matching Hirose
connector that will plug into the host reader.
Position the SABRE module (with logo up),
onto the Hirose connector and press firmly
to make a connection.
Once a connection is made between the Hiroshi
connectors, the module will start to receive power
and within 5 seconds will be operational.
With the SABRE module connected, re-mount
the reader onto the wall and reinsert the
mounting screw.
Open the Safetrust Wallet APP and select Admin
Installer tab. Make sure your system admin has
set you up with this role).
www.Safetrust.com
Quick Start Guide
SABRE Module