Foreword The purpose of this section is to ensure that user can use product correctly through this manual to avoid danger or property damage during operation. Before using this product, please read the manual carefully and save it for future reference. Without written permission, no unit or individual may extract, copy, translate, or modify all or part of this manual in any way. Unless otherwise agreed, the company does not provide any express or implied statement or guarantee for this manual.
Chapter 1: Product Overview 7-inch temperature measurement panel with 7-inch temperature | vertical bracket measurement anal 7-inch temperature measurement panel with wall bracket 8-inch temperature measurement panel with 8-inch temperature vertical bracket measurement panel 8-inch temperature measurement panel with wall bracket 1.1 Product Introduction The temperature measurement &Face recognize panel using Dual sensor with living detect, based on face recognition and infrared temperature detection.
7-inch with vertical bracket vertical bracket bracket | S-if eh with B-inch with wall interface descriptor hi WE OUT 1:00 2:01 1:00 2:01 3:GND 43 ALARM OUT RELAY SWITCH J& use pause 48 ROJAS 100M 46 Behave POWER IN 12V/3A WOODCUT: Orange Do: Whited. Green GND WON: BrosnandwhiteD0. Yellow D1. Gray GND 11 | Multi functional | ARMOUR: Brawn Alarm. Purple ALARM interface | RADS: Orangeade White 405+ Blu sand Wise 485 # USB: Redbird. Blued-.
Precautions 1. Device working temperature {Device optimum working temperature :16~32 CL. Do not Install under the vent and ensure that there is no heating source within 3 meters; 2. People entering the room from a cold outdoor environment will affect measurement accuracy. The forehead temperature test needs to be performed indoors without covering the forehead for three minutes and the temperature is stable; 3. The temperature read by the temperature measuring device is the temperature in the forehead area.
2. Temporary test petition, {Tripod mounting) 2.1 Temperature measurement panel with vertical bracket: Attach the cable tie from the “Accessory Pack” to the tripod for the temperature measurement access control on the column, Temperature measurement panel with wall bracket Mount the gimbals bracket in the “Accessory Pack” to the tripod for the wall-mounted temperature measurement access control. Connect the power supply and network cable. 2.
Installation without 86 boxes: Step 1: Fix the mounting base on the mounting wall as shown in the figure below. Step 2: Use a special tamper-proof wrench to loosen the tamper-rises attn fixing screws at the bottom of the device, remove the mounting plate, and lock it to the mounting base plate according to the hole position. Step 3: Hang the device from top to bottom on the mounting plate. Step 4: Use a special tamper wrench at the bottom of the device to lock the tamper screws . Chapter &: Instructions &.
System Time Han ine iit i: Bie CF sere RE LOR 3 IEEE envy REO EE FRG EN 21.4.2 Wireless network parameter selling Click "Scan“ to search for nearby wireless network, select target network, then enter password, click save bunion, when connect succotash device IP will show on LCD monitor. So please disconnect RJ45 network cable from device.
4.2.2.2 Screen display mode Set the display mode according to the usage {default is closed when detect no person}. 4.2.2.3 Temperature threshold The temperature threshold can be set between 35-45 C, the default value is 37.3 C, can be modified according to actual use needs. 4.2.2.
£.2.2.10 Open door setting This setting can be used in combine with “mask temperature detection setting”, or can be set separately. Piping conditions: Pusan ace nationhood toad the doo {0800 + Fate tatterdemalion Bb dos he font Hod internalizing + Sid ID nl REE III BS kittenish an i band = fad verification 1 apn fe dogs ‘Elegance Sines he Colin penned So Penn Son caw rial Gandhian swine nope ihe door of whitelist convectional fo anon dole 4.2.2.
2. Face temperature measurement minimum pixel setting range: 300 3. Face recognition minimum pixel setting range: 30 ~ 300. Default: 130 4. When the face's pixels in the frame are less than 130 {the smallest pixel for face recognition], they are not captured; when the face's pixel sin the frame are greater than 500 {the largest pixel for face recognition), they are not captured. | Face recitative prairie: phaeton Bis] SEE Fan dhe has 500 | we gil | man 4.2.3.
Step 1: Click Browse, according te the storage path Carl + A select all or press Carl + mouse to select the face image to be imported; Step 3: Select the type of lst Library {white list, VIP list}; Step 4: Click"Save” Picture name, numbering rules: Picture name + picture numbers can not be repeated, single item can be repeated, ID number and mobile phone number can be optional. [Delete the face list and double-click te delete the face image to be deleted). 4.2.5 Attendance and Comparison record 4.2.5.
8” access control panel diagram: i " aE FCC Warning: Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This advice complies with part 18 of the FCC Rules. Operation is subject to the following two conditions: {1} This device may not cause harmful interference, and {2 this device must accept any Interference received, including interference that may cause undesired operation.