Installation & Assembly

PIECE QUANTITY

A 3X

B1 2X

B2 1X

C 6X

D 2X

H1 12X

H2 12X

H3 4X

H4 12X

H5 1X

Panel

Metal frame

Panel

CARE AND MAINTENANCE

* Please make sure that you have all parts indicated before you begin assembly of

this item

* This item should be assembled on a soft surface to prevent scratching the finish

during assembly

* This item may require periodic tightening

Part List and Hardware List

DESCRIPTION

PICTURE

Panel

Allen key

Panel

Allen bolt L

M6X30mm

Allen bolt M

M6X20mm

Allen bolt S

M6X15mm

Screw

Product Dimensions:31-1/2"WX12-3/5"DX78-3/4"H

Always use felt pads under allarticles to prevent discoloration or softening of the

lacquer. Plastic and rubber bases on items can discolor wood. Wipe up spills

immediately and avoid common hazards such as hot dishes,harsh solvents and

abrasives. Cleaning should be done with a soft lint free cotton cloth dampened with

water or furniture polish. On highly used surfaces we recommend applying a quality

paste wax which should be used on a regular basis to provide additional protection

from sratches and spills. How often you apply the wax depends on how much wear the

furniture receives.

NOTICE

PAGE 1
CARE AND MAINTENANCE Always use felt pads under allarticles to prevent discoloration or softening of the lacquer. Plastic and rubber bases on items can discolor wood. Wipe up spills immediately and avoid common hazards such as hot dishes,harsh solvents and abrasives. Cleaning should be done with a soft lint free cotton cloth dampened with water or furniture polish.
PAGE 2
PREPARATION Before beginning assembly of product, make sure all parts are present. Compare parts with package contents list and hardware contents list. 1 2 Step 1 Attach the Screw(H4) to Panel(B1), Panel(B2) Tighten with philips driver 4 Step 4 Attach the Panel(C) to the Panel(B2), tighten with philips driver. Attach the Panel(A)to Panel(C), using Allen bolt(H1) Tighten with Allen Key(H5) Step 2 Attach Panel(C) to Panel(B1), tighten with philips driver.