Installation Guide

PIECE QUANTITY
A 1X
B 1X
C 1X
H1 2X
H3 1X
H4
2X
H5 1X
Step 1 : Use bolt M6x25 ( H3) to conect wooden legs ( B) and ( C) Step 2 : The hardware need to connect wooden frame and concrete top are 4 bolt ( H4) and wahser ( H1)
Model# : VNN1021A
Part List and Hardware List
Wooden legs
CARE AND MAINTENANCE
Always use felt pads under all articles to prevent discoloration or softening of the lacquer. Plastic and
rubber bases on items can discolor wood. Wipe up spills immediately and avoid common hazards such as
hot dishes, harsh solvents and abrasives. Cleaning should be done with a soft lint free cotton cloth
dampened with water or furniture polish. On highly used surfaces we recommend applying a quality paste
wax which should be used on a regular basis to provide additional protection from scratches and spills.
How often you apply the wax depends on how much wear the furniture receives.
NOTICE
* Please make sure that you have all parts indicated before you begin assembly of this item
* This item should be assembled on a soft surface to prevent scratching the finish during assembly
Wooden legs
WASHER
BOLT M6x25
Product Dimensions: L47.52xW31.5xH17.72 inches
DESCRIPTION
PICTURE
CEMENT TOP
BOLT M8x50
ALLEN KEY
PREPARATION
Before beginning assembly of product, make sure all parts are present. Compare parts with package contents list and hardware contents
list.
If any part is missing or damaged, do not attempt to assemble the product.
Estimated Assembly Time: 10 minutes.
3

Summary of content (1 pages)