Instructions / Assembly
PIECE QUANTITY
A 1X
B 1X
C 1X
H2 1X
H3
1X
H4 1X
Step 1 Step 2
PREPARATION
Before beginning assembly of product, make sure all parts are present. Compare parts with package contents list and hardware
contents list.
If any part is missing or damaged, do not attempt to assemble the product.
Estimated Assembly Time: 10 minutes.
The hardware needed to connect the leg (B) to the leg (C) are
a cross bolts (H3) and a washer (H2).please do not tighten the
Put the cement top fit to wooden base as picture above .
ALLEN KEY
WOODEN LEG
WASHER
BOLT
Product Dimensions:D 33.46 x H 18.11 inches
DESCRIPTION
PICTURE
CEMENT TOP
WOODEN LEG
CARE AND MAINTENANCE
Always use felt pads under all articles to prevent discoloration or softening of the lacquer.
Plastic and rubber bases on items can discolor wood. Wipe up spills immediately and avoid
common hazards such as hot dishes, harsh solvents and abrasives. Cleaning should be done
with a soft lint free cotton cloth dampened with water or furniture polish. On highly used
surfaces we recommend applying a quality paste wax which should be used on a regular
basis to provide additional protection from scratches and spills. How often you apply the wax
depends on how much wear the furniture receives.
NOTICE
* Please make sure that you have all parts indicated before you begin assembly of this item
* This item should be assembled on a soft surface to prevent scratching the finish during
assembly
* This item may require periodic tightening
Model#VNN1013B
Part List and Hardware List
H2
H3