Instructions / Assembly

Assembly Instruction

CAUTION: Read instruction carefully and turn electricity off at main circuit breaker panel

before beginning installation.

ITEM#: PLT4009A

Care and Cleaning

To clean the outside of the fixture, use a dry or slightly dampened clean cloth(use clean water,

never a solvent) to wipe the surface of the fixture.

To clear the inside of the fixture, first disconnect power to the fixture by turning off the circuit

breaker or by removing the fuse at the fuse box. Next, use a dry or slightly dampened clean

cloth(use clean water, never a solvent) to wipe the interior surface of the fixture

Do not use any cleaners with chemical, solvents or harsh abrasives. Use Only a dry soft cloth to

dust or wipe carefully.

Estimated Assembly Time:20 minutes

Part List and Hardware List

PIECE

DESCRIPTION

PICTURE QUANTITY PIECE DESCRIPTION PICTURE QUANTITY

mounting

bracket

1X G

mounting

screw

machine

screw

2X H ground screw 1X

C backplate 1X J bulb 1X

D washer 2X k Frame 1X

E Cap Nut 2X M screw 2X

wire

connector

PAGE 1
Assembly Instruction CAUTION: Read instruction carefully and turn electricity off at main circuit breaker panel before beginning installation. ITEM#: PLT4009A Care and Cleaning To clean the outside of the fixture, use a dry or slightly dampened clean cloth(use clean water, never a solvent) to wipe the surface of the fixture. To clear the inside of the fixture, first disconnect power to the fixture by turning off the circuit breaker or by removing the fuse at the fuse box.
PAGE 2
Installation Step 1 Loose the Screws(M) to remove the polyfoam from the Frame(K) Step 2 Install the mounting bracket(A) to the junction box with machine screw (B) Step 3 Wire connection Make wire connections, with wire connectors(F), following the reference chart listed below.