Instructions / Assembly

Assembly Instruction

CAUTION: Read instruction carefully and turn electricity off at main circuit breaker panel

before beginning installation.

ITEM#: PLT4001A

Care and Cleaning

To clean the outside of the fixture, use a dry or slightly dampened clean cloth(use clean water, never

a solvent) to wipe the surface of the fixture.

To clear the inside of the fixture, first disconnect power to the fixture by turning off the circuit breaker

or by removing the fuse at the fuse box. Next, use a dry or slightly dampened clean cloth(use clean

water, never a solvent) to wipe the interior surface of the fixture

Do not use any cleaners with chemical, solvents or harsh abrasives. Use Only a dry soft cloth to dust

or wipe carefully.

Estimated Assembly Time:20 minutes

Part List and Hardware List

PIECE DESCRIPTION PICTURE

QUANTITY

PIECE DESCRIPTION PICTURE QUANTITY

A mounting bracket 1X H ground screw 1X

B machine screw 2X J bulb 1X

C backplate 1X k shade 1X

D washer 4X L Frame 1X

E Cap Nut 2X M glass fixture 4X

F wire connector 3X O Studs 2X

G mounting screw 2X

PAGE 1
Assembly Instruction CAUTION: Read instruction carefully and turn electricity off at main circuit breaker panel before beginning installation. ITEM#: PLT4001A Care and Cleaning To clean the outside of the fixture, use a dry or slightly dampened clean cloth(use clean water, never a solvent) to wipe the surface of the fixture. To clear the inside of the fixture, first disconnect power to the fixture by turning off the circuit breaker or by removing the fuse at the fuse box.
PAGE 2
Installation Step 1 Install the mounting bracket(A) to the junction box with machine screw (B) Step 2 Wire connection Make wire connections, with wire connectors(F), following the reference chart listed below.