Instructions / Assembly

ManualsBrandsSAFAVIEH ManualsOutdoorsHailee Gray/Brown 9-Piece Wicker Outdoor Patio Dining Set with White Cushions

CARE AND MAINTENANCE

Store outdoor furniture indoors or cover well when not in use.

Remove wooden furniture from standing water. Dust regularly with small brush or vacuum

Spills should be taken care of immediately before they harden or

stain with a slightly dampened sponge.

NOTICE

* Please make sure that you have all parts indicated before you begin assembly of this item

* This item should be assembled on a soft surface to prevent scratching the finish during assembly

* This item may require periodic tightening

Part List and Hardware List

Model# PAT7704-1/4

Product Dimensions:

74.8"x35.43"x29.13" H (Table)

22.44"x22.44"x34.65" H (Chair)

Weight Capacity : 275 Ibs (single seat)

550 Ibs (two person seat)

Warning : Do not stand on bench

Warning : Do not over torque bolts/screws

1-3

PIECE

DESCRIPTION

Allen bolt(M6x20 mm)

Middle table top frame

Allen bolt(M6x40 mm)

Table leg

Flat washer

Allen key

Allen bolt(M6x30 mm)

PICTURE

QUANTITY

24X

40X

48X

112X

Chair/ Back Frame

Table Glass

Seat Cushion

Chair/Right Frame

Chair/Left Frame

Chair seat

Chair front panel

Short table top frame

Long table corner fame 1

Long Table corner fame 2

Summary of content (11 pages)

PAGE 1
CARE AND MAINTENANCE Store outdoor furniture indoors or cover well when not in use. Remove wooden furniture from standing water. Dust regularly with small brush or vacuum Spills should be taken care of immediately before they harden or stain with a slightly dampened sponge.
PAGE 2
CARE AND MAINTENANCE Store outdoor furniture indoors or cover well when not in use. Remove wooden furniture from standing water. Dust regularly with small brush or vacuum Spills should be taken care of immediately before they harden or stain with a slightly dampened sponge.
PAGE 3
E A A 3 3 J3 F STEP 9 3 H 3 A A A A 8 A A 9 A A 7 STEP 1 : Connect Long Table Top Frame 1 (6) with Short Table Top Frame (8), Long Table Top Frame 2 (7) with Short Table Top Frame (8), tighten Bolt (A), Flat washer (D) with Allen key (E). A A A 9 8 A G 3 3 STEP 8 6 A A 7 STEP 2 : Connect The Part From STEP 1 and Middle Table Top (9) ,tighten Bolt (A), Flat washer (D) with Allen key (E).
PAGE 4
CARE AND MAINTENANCE Store outdoor furniture indoors or cover well when not in use. Remove wooden furniture from standing water. Dust regularly with small brush or vacuum Spills should be taken care of immediately before they harden or stain with a slightly dampened sponge.
PAGE 5
CARE AND MAINTENANCE Store outdoor furniture indoors or cover well when not in use. Remove wooden furniture from standing water. Dust regularly with small brush or vacuum Spills should be taken care of immediately before they harden or stain with a slightly dampened sponge.
PAGE 6
x4 x4 4 1 C C B B B 5 STEP 1 : Connect Chair Seat (4) and Chair Front Panel (5), tighten STEP 2 : Connect the Part from STEP 1 (4) and Right Frame (1), tighten Bolt (B),(C), Flat washer (D) with Allen Key (E). Bolt (B), Flat washer (D) with Allen key (E). x4 x4 3 2 C C B STEP 3 : Connect the Part from STEP 1 (4) and Left Frame (2) tighten Bolt (B), (C), Flat washer (D) With Allen key (E).
PAGE 7
x4 x4 C C B B STEP 5 : Connect the Part from STEP4 and Bolt (C) with Allen key (E). STEP 6 : Connect the Part from STEP5 and Bolt (B) with Allen key (E). x4 x4 12 STEP 7 : Put On Seat Cushion (12) to complete Chair.
PAGE 8
CARE AND MAINTENANCE Store outdoor furniture indoors or cover well when not in use. Remove wooden furniture from standing water. Dust regularly with small brush or vacuum Spills should be taken care of immediately before they harden or stain with a slightly dampened sponge.
PAGE 9
CARE AND MAINTENANCE Store outdoor furniture indoors or cover well when not in use. Remove wooden furniture from standing water. Dust regularly with small brush or vacuum Spills should be taken care of immediately before they harden or stain with a slightly dampened sponge.
PAGE 10
x4 x4 4 1 C C B B B 5 STEP 1 : Connect Chair Seat (4) and Chair Front Panel (5), tighten STEP 2 : Connect the Part from STEP 1 (4) and Right Frame (1), tighten Bolt (B),(C), Flat washer (D) with Allen Key (E). Bolt (B), Flat washer (D) with Allen key (E). x4 x4 3 2 C C B STEP 3 : Connect the Part from STEP 1 (4) and Left Frame (2) tighten Bolt (B), (C) Flat washer (E) With Allen key (F).
PAGE 11
x4 x4 C C B B STEP 5 : Connect the Part from STEP4 and Bolt (C) with Allen key (E). STEP 6 : Connect the Part from STEP5 and Bolt (B) with Allen key (E). x4 x4 12 STEP 7 : Put Seat Cushion (12) on Chair to complete Chair.