Instructions / Assembly

ManualsBrandsSAFAVIEH ManualsOutdoor Lounge FurnitureDiona Natural Wicker Outdoor Patio Sectional with White Cushions

Model# PAT7510 - 1/2

Product Dimensions:

26.38"x26.38"x26.38" H (Chair)

26.38"x26.38"x26.38" H (Corner)

26.38"x26.38"x13.97" H (Table)

NOTICE

* Please make sure that you have all parts indicated before you begin assembly of this item

* This item should be assembled on a soft surface to prevent scratching the finish during assembly

* This item may require periodic tightening

CARE AND MAINTENANCE

Store outdoor furniture indoors or cover well when not in use.

Remove wooden furniture from standing water. Dust regularly with small brush or vacuum

Spills should be taken care of immediately before they harden or

stain with a slightly dampened sponge.

Part List and Hardware List

1-4

QUANTITY

PIECE

DESCRIPTION

Flat washer

Allen bolt(M6x25 mm)

Allen key

Allen bolt(M6x30 mm)

Chair back frame

Chair seat frame

Chair front frame

Chair side left - right frame

Chair seat cushion

Chair back cushion

PICTURE

Plastic feet

40X

16X

48X

Allen bolt(M6x40 mm)

32X

Weight Capacity : 275 Lbs (single seat)

550 Lbs (towperson seat)

Warning : Do not stand on chair

Warning : Do not over torque bolts/screws

Summary of content (11 pages)

PAGE 1
CARE AND MAINTENANCE Store outdoor furniture indoors or cover well when not in use. Remove wooden furniture from standing water. Dust regularly with small brush or vacuum Spills should be taken care of immediately before they harden or stain with a slightly dampened sponge.
PAGE 2
CARE AND MAINTENANCE Store outdoor furniture indoors or cover well when not in use. Remove wooden furniture from standing water. Dust regularly with small brush or vacuum Spills should be taken care of immediately before they harden or stain with a slightly dampened sponge.
PAGE 3
PREPARATION Before beginning assembly of product, make sure all parts are present. Compare parts with package contents list and hardware contents list. If any part is missing or damaged, do not attempt to assemble the product. Estimated Assembly Time: 15 minutes.
PAGE 4
x4 5 x4 A A E A E 6 A E E Step 4 Connect part from Step 3 & Plastic Feet (E) tighten Bolt (A) with Allen key (F) 5 Step 5 Puton Chair Seat Cushion (5) & Chair Back Cushion (6) to complete Chair 4-4
PAGE 5
CARE AND MAINTENANCE Store outdoor furniture indoors or cover well when not in use. Remove wooden furniture from standing water. Dust regularly with small brush or vacuum Spills should be taken care of immediately before they harden or stain with a slightly dampened sponge.
PAGE 6
CARE AND MAINTENANCE Store outdoor furniture indoors or cover well when not in use. Remove wooden furniture from standing water. Dust regularly with small brush or vacuum Spills should be taken care of immediately before they harden or stain with a slightly dampened sponge.
PAGE 7
1 x2 8 2 x2 7 D C D D C D C C D 9 Step 1 Connect Corner Back Frame (7) & Corner Seat Frame (9) & tighten Bolt (C) with Allen key (F) Step 2 Connect part from Step 1 & Corner Armrest Frame (8) tighten Bolt (C) with Allen key (F) 3 x2 4 x2 4 D 10 D D B ÿӕ dài trѭӟc ÿӕ này ngҳn, bҳt ӕc qua ÿӕ dài trѭӟc Step 3 Connect part from Step 2 & Corner Front Frame (10) tighten Bolt (B) with Allen key (F) D B B D Step 4 Connect part from Step 3 & Corner Side Frame (4) tighten Bolt (B) with Allen ke
PAGE 8
5 6 A 13 12 E A A E A E 14 E 11 Step 4 Connect part from Step 4 & Plastic Feet (E) tighten Bolt (A) with Allen key (F) Step 5 Puton Corner Seat Cushion (11), Corner Long Back Cushion (12), Corner Short Back Cushion (13), Pillow (14) to complete Corner 4-4
PAGE 9
CARE AND MAINTENANCE Store outdoor furniture indoors or cover well when not in use. Remove wooden furniture from standing water. Dust regularly with small brush or vacuum Spills should be taken care of immediately before they harden or stain with a slightly dampened sponge.
PAGE 10
CARE AND MAINTENANCE Store outdoor furniture indoors or cover well when not in use. Remove wooden furniture from standing water. Dust regularly with small brush or vacuum Spills should be taken care of immediately before they harden or stain with a slightly dampened sponge.
PAGE 11
1 2 3 4 D B D D B D B B B D B 15 D D B D B 3 D B B D 4 Step 1 Connect Table Side Frame (3) & Table Top Frame (15) & tighten Bolt (B) with Allen key (F) Step 2 Connect part from Step 1 & Table Front & Rear Frame (4) tighten Bolt (B) with Allen key (F) 3 4 A D B E A E A E 16 E Step 3 Connect part from Step 2 & Plastic Feet (E) tighten Bolt (A) with Allen key (F) Step 4 Puton Table Glass (16) to complete Table 3-3