Installation Guide

Step 4: attach left side (D) as shown on the picture by

using the Allen Bolt L (G1) and the Allen Bolt S (G3).

Then tighten with the Allen Key (G8) and wrench (G7)

as shown on the picture.

Step 5: continue with the right side (E) in the same way

as step 4. Make sure to tighten al bolts before using.

PAGE 1
4 G1 5 G8 G1 G8 G8 G8 G8 c A G3 E E B G7 G3 G7 G7 Step 4: attach left side (D) as shown on the picture by using the Allen Bolt L (G1) and the Allen Bolt S (G3). Then tighten with the Allen Key (G8) and wrench (G7) as shown on the picture. Step 5: continue with the right side (E) in the same way as step 4. Make sure to tighten al bolts before using.
PAGE 2
PREPARATION Before beginning the assembly of the product, make sure all parts are present. Compare the parts with the package contents list and hardware contents list. If any parts are missing or damaged, do not attempt to assemble the product. Tool required for assembly (included): Allen Key and Wrench. 1 2 G8 G8 G5 Step 1: put the back (A) inside the seat (B) use the Allen Screw L (G4) to attach it to the chair by using the Allen Key (G8) as shown on the picture.
PAGE 3
CARE AND MAINTENANCE Store outdoor furniture indoors or cover well when it is not in use. Dust regularly with small brush or vacuum. Spills should be taken care of immediately before they harden or stain with a slightly dampened sponge. NOTICE Please make sure that you have all parts indicated before you begin assembly of this item.