Installation Guide

Before beginning the assembly of the product, make sure all parts are present.

Compare the parts with the package contents list and hardware contents list.

If any parts are missing or damaged, do not attempt to assemble the product.

Tool required for assembly (included): Allen Key and Wrench.

Step 1: put the Leg X (C) inside the Leg L (B) as shown on the

picture by using the Allen Bolt L(D1). Tighten it with the Wrench

(D3) and the Allen Key (D4).

PREPARATION

Step 2: turn down the table top (A) and attach the legs as shown on

the picture by using Allen Bolt S (D2).Tighten it with the Wrench (D3)

and the Allen Key (D4).

PAGE 1
PREPARATION Before beginning the assembly of the product, make sure all parts are present. Compare the parts with the package contents list and hardware contents list. If any parts are missing or damaged, do not attempt to assemble the product. Tool required for assembly (included): Allen Key and Wrench. 1 2 D3 D2 D3 D2 D1 D1 D4 D4 D2 D2 D3 D1 D3 D2 D2 Step 1: put the Leg X (C) inside the Leg L (B) as shown on the picture by using the Allen Bolt L(D1).
PAGE 2
CARE AND MAINTENANCE Store outdoor furniture indoors or cover well when it is not in use. Dust regularly with small brush or vacuum. Spills should be taken care of immediately before they harden or stain with a slightly dampened sponge. NOTICE Please make sure that you have all parts indicated before you begin assembly of this item.