Instructions / Assembly

PIECE DESCRIPTION PICTURE

QUANTITY

PIECE DESCRIPTION PICTURE QUANTITY

mounting

screw

1X I tube 1X

mounting

bracket

1X J ring nut 1X

C machine screw 1X K bulb 1X

D wire connector 1X L

short crystal

string

E screwed ball 1X

F ground screw 1X

G canopy 1X

H ceiling plate 1X

Part List and Hardware List

CARE AND MAINTENANCE

To clean the outside of the fixture, use a dry or slightly dampened clean cloth (use clean water, never a

solvent) to wipe the surface of the fixture.

To clean the inside of the fixture, first disconnect power to the fixture by turning off the circuit breaker or by

removing the fuse at the fuse box. Next, use a dry or slightly dampened clean cloth (use clean water, never a

solvent) to wipe the interior surface of the fixture.

Do not use any cleaners with chemical, solvents or harsh abrasives. Use only a dry soft cloth to dust or wipe

carefully.

NOTICE& IMPORTANT SAFETY INSTRUCTIONS

Model#: LIT4239A

Product Dimensions: 20.25"D X 57"H

* Please make sure that you have all parts indicated before you begin assembly of this item

* This item should be assembled on a soft surface to prevent scratching the finish during assembly

* To reduce the risk of fire, electrical shock or injury to persons or property, please follow the guideline below

for safe use and installation

*The external flexible cable or cord of this luminaire cannot be replaced

If the cord is damaged, the luminaire shall be destroyed

longest crystal

string

2nd longest

crystal string

PAGE 1
CARE AND MAINTENANCE To clean the outside of the fixture, use a dry or slightly dampened clean cloth (use clean water, never a solvent) to wipe the surface of the fixture. To clean the inside of the fixture, first disconnect power to the fixture by turning off the circuit breaker or by removing the fuse at the fuse box. Next, use a dry or slightly dampened clean cloth (use clean water, never a solvent) to wipe the interior surface of the fixture.
PAGE 2
PREPARATION Before beginning assembly of product, make sure all parts are present. Compare parts with package contents list and hardware contents list. If any part is missing or damaged, do not attempt to assemble the product. Estimated Assembly Time: 20 minutes. 1. Fix the mounting bracket (B) to the outlet box with machine screw (C). 2. Make wire connections, with wire connectors (D), following the reference chart listed below.