Instructions / Assembly

PIECE DESCRIPTION PICTURE

QUANTITY

PIECE DESCRIPTION PICTURE QUANTITY

mounting

bracket

1X H fixture loop 1X

B machine screw 2X I crystal string(I) 6X

mounting

screw

1X J bulb 3X

D wire connector 3X K

crystal

string(K)

E collar loop 1X L crystal string(L) 3X

F canopy 1X M

crystal

string(M)

18X

G chain 1X N shade 1X

CARE AND MAINTENANCE

To clean the outside of the fixture, use a dry or slightly dampened clean cloth (use clean water, never a

solvent) to wipe the surface of the fixture.

To clean the inside of the fixture, first disconnect power to the fixture by turning off the circuit breaker or by

removing the fuse at the fuse box. Next, use a dry or slightly dampened clean cloth (use clean water, never

a solvent) to wipe the interior surface of the fixture.

Do not use any cleaners with chemical, solvents or harsh abrasives. Use only a dry soft cloth to dust or wipe

carefully.

NOTICE& IMPORTANT SAFETY INSTRUCTIONS

Model#: LIT4234A

Product Dimensions: 18"D X 95.625"H

* Please make sure that you have all parts indicated before you begin assembly of this item

* This item should be assembled on a soft surface to prevent scratching the finish during assembly

* To reduce the risk of fire, electrical shock or injury to persons or property, please follow the guideline below

for safe use and installation

*The external flexible cable or cord of this luminaire cannot be replaced

If the cord is damaged, the luminaire shall be destroyed

Part List and Hardware List

PAGE 1
CARE AND MAINTENANCE To clean the outside of the fixture, use a dry or slightly dampened clean cloth (use clean water, never a solvent) to wipe the surface of the fixture. To clean the inside of the fixture, first disconnect power to the fixture by turning off the circuit breaker or by removing the fuse at the fuse box. Next, use a dry or slightly dampened clean cloth (use clean water, never a solvent) to wipe the interior surface of the fixture.
PAGE 2
PREPARATION Before beginning assembly of product, make sure all parts are present. Compare parts with package contents list and hardware contents list. If any part is missing or damaged, do not attempt to assemble the product. Estimated Assembly Time: 20 minutes. 1. Fix the mounting bracket (A) to the outlet box with machine screw (B). 2. Make wire connections, with wire connectors (D), following the reference chart listed below.