Installation Guide

ManualsBrandsSafavieh ManualsFurnitureDejana Black Synthetic Leather Office Chair

CARE AND MAINTENANC

Wipe clean with a soft, dry cloth. The seat board can be cleaned with a mild cleaner.

Test the cleaning method on a hidden area before using them over the entire area .

NOTICE

* Please make sure that you have all parts indicated before you begin assembly of thi

item

* This item should be assembled on a soft surface to prevent scratching the finish

during assembly

This item may require periodic tightening

Model# FOX8506

Product Dimensions: 22.4*27.6*41.3~45.1

PIECE QUANTITY

(1) 1X

(2) 1X

(3)

1X(R L)

Seat Cushion

This

item

may

require

periodic

tightening

Back Cushion

Part List and Hardware List

Arms (R & L)

DESCRIPTION PICTURE

(3)

1X(R

(4) 1X

(5) 1X

(6) 1X

(7) 1X

(8)

Star Base

Caster

Control Mechanism

Cylinder Column

Bellows

Arms

(8)

(9) 4X

(10) 4X

(11) 4X

(12) 8X

(13)

Washer

Screw Cove

Medium Screw

Long Screw

Caster

Short Screw

(13)

(14) 1X

Small Allen Wrench

Screw

Cover

Summary of content (3 pages)

PAGE 1
CARE AND MAINTENANCE Wipe clean with a soft, dry cloth. The seat board can be cleaned with a mild cleaner. Test the cleaning method on a hidden area before using them over the entire area .
PAGE 2
PREPARATION Before beginning assembly of product, make sure all parts are present. Compare parts with package contents list and hardware contents list. If any part is missing or damaged, do not attempt to assemble the product. Estimated Assembly Time: 10 minutes. Tools Required for Assembly (included): Allen Wrench Step 1 Step 2 Insert five Casters (8) into Star Base (7), push hard until you feel or hear the Caster(8) snap into place.
PAGE 3
Step 4 Step 5 Now insert the small end of Cylinder Column (5) into Control Mechanism (4) and carefully press downward with moderate force until it is fully seated. Connect the armrests(3) to seat(2) by using four Long Screws(11) and four Screw Covers. Step 6 The chair is ok now.