Installation Guide

Before beginning the assembly of the product, make sure all parts are present.

Compare the parts with the package contents list and hardware contents list.

If any parts are missing or damaged, do not attempt to assemble the product.

Tool required for assembly (included): Allen Key.

PREPARATION

Step 1: attach the back (A) and the seat (B) to the

left side (D) and right side as shown on the

picture. Use the Allen bolt (E1) and Allen screw (E2)

to attach it together by using the Allen Key (E4).

(C)

Step 2: For using the table of the seat (B) you need

to lift the table and lock it as shown on the picture.

Make sure the support bar is locked before use.

PAGE 1
2 Step 1: attach the back (A) and the seat (B) to the Step 2: For using the table of the seat (B) you need to lift the table and lock it as shown on the picture. left side (D) and right side (C) as shown on the picture. Use the Allen bolt (E1) and Allen screw (E2) Make sure the support bar is locked before use. to attach it together by using the Allen Key (E4). 1 Before beginning the assembly of the product, make sure all parts are present.
PAGE 2
PIECE Allen Key Extra bolt Allen screw Allen bolt Left side Right side Seat Back DESCRIPTION M6x50 M6x70 M6x70 PICTURE QUANTITY Please make sure that you have all parts indicated before you begin assembly of this item. Part List and Hardware List NOTICE Store outdoor furniture indoors or cover well when it is not in use. Dust regularly with small brush or vacuum. Spills should be taken care of immediately before they harden or stain with a slightly dampened sponge.