Instructions / Assembly

Model# FOX4283

Product Dimensions:35-2/5"WX11-4/5"DX50-2/5"H

PIECE QUANTITY

A1 1X

A2 3X

B1 3X

B2 1X

C1 1X

C2 1X

C3 1X

C4 1X

Panel

DESCRIPTION

PICTURE

CARE AND MAINTENANCE

Always use felt pads under allarticles to prevent discoloration or softening of the

lacquer. Plastic and rubber bases on items can discolor wood. Wipe up spills

immediately and avoid common hazards such as hot dishes,harsh solvents and

abrasives. Cleaning should be done with a soft lint free cotton cloth dampened with

water or furniture polish. On highly used surfaces we recommend applying a quality

paste wax which should be used on a regular basis to provide additional protection

from sratches and spills. How often you apply the wax depends on how much wear the

furniture receives.

NOTICE

* Please make sure that you have all parts indicated before you begin assembly of

this item

* This item should be assembled on a soft surface to prevent scratching the finish

during assembly

* This item may require periodic tightening

Part List and Hardware List

Panel

Metal frame

PAGE 1
CARE AND MAINTENANCE Always use felt pads under allarticles to prevent discoloration or softening of the lacquer. Plastic and rubber bases on items can discolor wood. Wipe up spills immediately and avoid common hazards such as hot dishes,harsh solvents and abrasives. Cleaning should be done with a soft lint free cotton cloth dampened with water or furniture polish.
PAGE 2
H1 Allen bolt L 6X M6X30mm H2 Allen bolt S 14X M6X20mm H3 Screw 8X H4 Allen key 1X H5 Washer 6X PREPARATION Before beginning assembly of product, make sure all parts are present. Compare parts with package contents list and hardware contents list.
PAGE 3
4 Step 4 Attach the Metal frame(C2) to Panel(A2), using Allen bolt(H2) Tighten with Allen key(H4) Attach the Panel (B1) to Panel (A2),tighten with philips driver 7 Step 7 Attach the Panel(A2) to Panel(B1),using Allen bolt and washer(H1&H5) Tighten white Allen Key(H4) Attach the Panel(A2) to Metal frame(C3),using Allen bolt(H2) Tighten white Allen Key(H4) 5 6 Step 5 Step 6 Attach the Panel(A2) to Panel(B1),using Allen bolt and washer(H1&H5) Attach the Metal frame(C3) to Panel(A2), using Allen bolt(H2)