Instructions / Assembly

PIECE QUANTITY

A 2X

B 2X

C 2X

H1 4X

H2 8X

H3 4X

H4 4X

H5 4X

H6 1X

H7 1X

Model# DCH1001

Product Dimenions: 17.3"W x 21.1" D x 33.5" H

BARREL NUT

CROSS BOLT

M6 x 80mm

HEADLESS BOLT

M8 x 70mm

SEMICIRCLE WASHER

M8 x 30mm

NUT

ALLEN KEY

DESCRIPTION

PICTURE

CHAIR SEAT

SPANNER

CARE AND MAINTENANCE

Spot clean using a mild water-free solvent. Only a professional cleaner should undertake

a complete overall cleaning.

The use of steam or water-based cleaners may cause excessive shrinking or staining.

NOTICE

* Please make sure that you have all parts indicated before you begin assembly of this

item

* This item should be assembled on a soft surface to prevent scratching the finish during

assembly

* This item may require periodic tightening.

Part List and Hardware List

CHAIR BACK

FRONT LEG

Ø10x45

PAGE 1
CARE AND MAINTENANCE Spot clean using a mild water-free solvent. Only a professional cleaner should undertake a complete overall cleaning. The use of steam or water-based cleaners may cause excessive shrinking or staining. NOTICE * Please make sure that you have all parts indicated before you begin assembly of this item * This item should be assembled on a soft surface to prevent scratching the finish during assembly * This item may require periodic tightening.
PAGE 2
PREPARATION Before beginning assembly of product, make sure all parts are present. Compare parts with package contents list and hardware contents list. If any part is missing or damaged, do not attempt to assemble the product. Estimated Assembly Time: 10 minutes.
PAGE 3
H1 H2 x4 x8 H1 A B STEP3 H4 H5 x4 x4 H
PAGE 4
H5 x4 H4 H5