Instructions / Assembly

Page1:

CARE AND MAINTENANCE

Spot clean using a mild water-free solvent.Only a professional cleaner should undertake

a complete overall cleaning.

The use of steam or water-based cleaners may cause excessive shrinking or staining.

F U R N I T U R E

NOTICE

*Please make sure that you have all parts indicated before you begin assambly of this

*This item should be assambled on a soft surface to prevent scratching the finish during

assembly

Item# ACH9501A

*This item may require periodic tightening

Product Dimensions:29"WX 35.6"D X 35.4"H

Part List

PIECE DESCRIPTION PICTURE QUANTITY

A Back 1X

B Seat 1X

C Seat Rail 1X

D Left arm 1X

Weight Capacity:275lbs

WARNING:DO NOT STAND ON CHAIR

PAGE 1
Page1: CARE AND MAINTENANCE Spot clean using a mild water-free solvent.Only a professional cleaner should undertake a complete overall cleaning. The use of steam or water-based cleaners may cause excessive shrinking or staining.
PAGE 2
Page2: E Right arm 1X F Back Cushion 1X G Seat Cushion 1X Hardware PIECE ① ② DESCRIPTION Bolt (M6*50MM) Allen Key PICTURE QUANTITY 10X 1X
PAGE 3
Page3: PREPARATION Before beginning assembly of product,make sure all parts are present.Compare parts with package contents list If any parts is missing or damage,do not attempt to assemble the product. Estimated Assembly Time:20 Minutes. 1 2 D D ① B Step1: Put the Left leg(D) onto the Seat(B) as shown in the picture.
PAGE 4
Page4: 3 E A ① D B C Step3: Turn the assambled parts over as the photo. Then put the Right leg(E) onto the Back(A) and Seat（B) Attach them as step1 to step2. Put the Seat Rail(C) between the Left leg(D) and Right leg(E) Attach Leg(E) and Leg(D) to Seat rail(C) using Bolts(①), Finally,tighten the Bolts fully in a sequential manner.