Instructions / Assembly

Table Of Contents

CARE AND MAINTENANCE

NOTICE

* Please make sure that you have all parts indicated before you begin assembly of this

item

* This item should be assembled on a soft surface to prevent scratching the finish during

assembly

* This item may require periodic tightening

Part Lis and Hardware List

Model# ACC6600A/ ACC6600B

Product Dimensions : 18"W X 15"D X 24"H

DRAWER BOX

PIECE DESCRIPTION DESCRIPTION QUANTITY

LEGS

1 PC

4 PCS

BOLTS M6

FLAT WASHERS

HEX KEY

8 PCS

1 PC

8 PCS

SPRING WASHERS

Always use felt pads under all articles to prevent discoloration or softening of the

lacquer. Plastic and rubber bases on items can discolor wood. Wipe up spills

immediately and avoid common hazards such as hot dishes, harsh solvents and

abrasives. Cleaning should be done with a soft lint free cotton cloth dampened with water

or furniture polish. On highly used surfaces we recommend applying a quality paste wax

which should be used on a regular basis to provide additional protection from scratches

and spills. How often you apply the wax depends on how much wear the furniture

receives.

PAGE 1
CARE AND MAINTENANCE Always use felt pads under all articles to prevent discoloration or softening of the lacquer. Plastic and rubber bases on items can discolor wood. Wipe up spills immediately and avoid common hazards such as hot dishes, harsh solvents and abrasives. Cleaning should be done with a soft lint free cotton cloth dampened with water or furniture polish.
PAGE 2
PREPARATION Before beginning assembly of product, make sure all parts are present. Compare parts with package contents list and hardware contents list. If any part is missing or damaged, do not attempt to assemble the product. Estimated Assembly Time: 5 minutes. Tools Required for Assembly (included): N/A B Step 1 B B 1. Attach a leg to its position 2. insert bolts (H1) with spring washer(H3) and flat washers (H2), into the holes and tighten it with hex key 3.