Aranet4 HOME, Aranet4 PRO NEW USER MANUAL Monitors air quality at your home, school, office or any other indoor private or public spaces.
About the Aranet4 device The Aranet4 sensor is a battery powered CO² meter with additional measurements of temperature, relative humidity and atmospheric pressure. * The device is suitable for monitoring the CO² level at home, in school, office or any other indoor environment. Measurement data is displayed on a power-efficient e-ink screen allowing for long battery life. Additionally the device can provide visual and sound notifications in case of the CO² concentration becomes unhealthy.
2 1 2 Temperature of the air in Celsius or Fahrenheit. Refer to the switch positions of the Aranet4 in chapter Switch positions explained. 3 Relative humidity of the air (RH %). 4 CO² concentration level in ppm (parts per million). 1 Aranet4 User Manual The Aranet4 sensor screen explained 2 Alarm status. The speaker symbol is visible when alarm function is activated. The alarm settings can be adjusted using the Aranet4 app. 3 7 4 8 5 9 6 5 CO² threshold level indication.
Aranet4 User Manual 3 The inverted screen alerts when CO² concentration is too high and unhealthy. Do not remove batteries during firmware upgrade. The battery is exhausted. Replace the batteries. The calibration progress. Pin code representation, when pairing device with smartphone trough Aranet4 app via Bluetooth Frost can damage the sensor. The recommended operating temperature of the sensor is 0 °C to 50 °C (32 °F to 122 °F). CO² calibration The Aranet4 device is calibrated at the factory.
Switch positions explained The Aranet4 device has four small configuration switches that allow the user to adjust the preferences of the device. To access the configuration switches, open the cover of the battery compartment on the back of the device. While batteries remain inserted, adjust the switch position (up or down) using the pin tool that is supplied with the Aranet4 device (or any other suitable thin tool).
How to pair Aranet4 to my smart device using the Aranet4 app Connect your smartphone with the Aranet4 device via Bluetooth by using iOS or Android (access to device’s location should be allowed due to general requirement for Bluetooth apps to work correctly on Android OS) app to: Access real-time measurement data overview View up to seven day measurement history View atmospheric pressure data Set adjustable CO² thresholds Set alarms and frequency of sensor readings Access all nearby Aranet4 devices Do the
Using Aranet4 PRO device with the Aranet PRO base station The Aranet PRO base station serves as a device for collecting, storing and maintaining data from all types of Aranet sensors, including Aranet4 PRO. Up to 100 sensors can be connected to a single Aranet PRO base station which has a capacity to store the measurement history up to 10 years.
FCC Compliance statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.