Table of Contents 1. Foreword ................................................................................. 1 2. Getting to know your touch phone.........................................4 3. Starting up your device............................................................5 4. Introduce the basic phone function .......................................8 5. FCC Cautions …………............................................................
1. FOREWORD Safety In order to ensure the phone is used safely and correctly, please read the precautions below carefully before use. 1.1 General precaution •Your phone is only suitable for the battery and charger approved by our company or else it may cause the battery to leak, overheat, explode or even catch fire. •Do not knock, vibrate or throw the phone heavily to avoid malfunction, fire, overheating, explosion or fire. •It may burn the skin if liquid in the battery leaks onto skin or clothes.
•Please remove accumulated dust on the power plug. •Do not put water containers next to the power supply to avoid overheating, fire, electric shock and malfunction in case they come into contact. •Do not disassemble or tamper with the charger or it may cause personal injury, electric shock, fire and the damage of the charger. •Do not use the charger in places of high humidity, like bathrooms, or it may cause electric shock, fire and damage of charger.
Charger: •Do not charge under following conditions: -- Places with direct sunlight -- Places with ambient temperature less than 0℃ or over 40℃, wet or dusty places with strong vibrations (it may cause malfunction) -- Places near electrical appliances (it may affect the image and sound) like TV set, radio, etc. -- Adapter shall be installed near the equipment and shall be easily accessible.
2. GETTING TO KNOW YOUR TOUCH PHONE The number of icons in the main desk or the main menu will be according the quantity of applications installed on your device. 1. Front Camera 2. Receiver 3. Proximity sensor 4. LCD Screen 5. Settings/Home/Back button 6. Power on/off button 7. Volume button 8. Earphone Connector 9. USB connector 10. Back camera 11. LED Flash 12. Speaker 13.
3. STARTING UP YOUR DEVICE •Make sure your device is turned off. •Firmly hold the device with the front panel facing down. •Slide your finger into the groove designed to open it and gently pull open the back cover. To install the SIM card •Locate the SIM card slot, and then insert the SIM card with its gold contacts and its cut-off corner as shown in the diagram. (Always power off the device before inserting the SIM) •Slide the SIM card completely into the slot.
To install a memory card To have additional storage for your images, videos, music and files, you can purchase a memory card and install it in your device. (Always power off the device before inserting the memory card) Locate the memory card slot and Insert the memory card into the slot as indicated by the image. Charging the Battery New batteries are shipped partially charged. Before you start using your device, it is recommended that you charge the battery.
Power on/off To power off your phone, press & hold POWER. On release, the Phone options menu opens. Select ‘Power off’ and confirm.
4. INTRODUCE THE BASIC PHONE FUNCTIONS 4.1. Switch Main Menu style (1) In default Home screen, slide your fingertip left and right along the screen to reveal the more home screen. (2) On Home screen, slide the arrow from down to up (Main menu arrow) to enter the main menu screen, slide your fingertip up and down along the screen to reveal the more applications. 4.2.
•To move an icon or other item on the Home screen, you must first touch & hold i t to enter move mode. The object will magnify when it’s ready to be moved. •Without lifting your finger (or you’ll drop out of move mode), drag the object to the new position. To move an item to a section of the Home screen not in view, move it to the edge of the screen and hold it there for a moment. The screen view will shift; position the object and release. 4.3.
wireless AP, and the other phone or computer can internet through the WLAN connect with your touch phone. Step 1: open Setting, then press more, get Tethering &portable hotspot Step 2: open Wlan hotspot, choose Set up Wlan hotspot, and set a new password Step 3: open the WLAN on other touch phones or computers, search the WLAN that your phone as a wireless AP, then input the password, by the way you can net play. 4.5. U-disk storage This phone supports movable storage with the U-disk function.
Before using the phone as a BT device, you need to pair the phone with the target device. As follows: -Sure your phone has BT-enabled. -Touch "Scan for devices." BT devices within the range of the phone will start scanning. -Touch the device you want to pair, to confirm password to complete the pairing You can use BT to share the pictures, videos or music files with family and friends 4.8 FM Radio The device includes a FM Radio application. To use this function you have to go to the main menu and select it.
5. FCC CAUTIONS 15.19 Labeling requirements. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. 15.21 Information to user. Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. 15.
by independent scientific organizations through periodic and thorough evaluation of scientific studies. The standards include a substantial safety margin designed to assure the safety of all persons regardless of age or health. FCC RF Exposure Information and Statement The SAR limit of USA (FCC) is 1.6 W/kg averaged over one gram of tissue. This device was tested for typical body-worn operations with the back of the handset kept 1.0cm from the body.
Tabla de contenidos 1. Prólogo ............................................................................................ 15 2. Conocer su teléfono táctil.............................................................. 18 3. Poner en marcha el dispositivo..................................................... 19 4. Introducir la función básica del teléfono ….................................. 20 5. PRECAUCIONES DE LA FCC ………………..................................
1. PRÓLOGO Seguridad Para asegurarse de que el teléfono se utiliza de forma segura y correcta, lea atentamente las precauciones que se indican a continuación antes de su uso. 1.1 Precaución general •Su teléfono sólo debe ser usado con la batería y el cargador aprobado por nuestra empresa o de lo contrario puede causar que la batería se suelte, se sobrecaliente, explote o incluso se incendie.
1.2 Precaución para el uso del cargador •No cause cortocircuito en el cargador, o puede causar descargas eléctricas, humos y daños en el cargador. •No utilice el cargador si el cable de alimentación está roto o puede provocar un incendio y una descarga eléctrica. •Retire el polvo acumulado en el enchufe. •No coloque recipientes de agua junto a la fuente de alimentación para evitar el sobrecalentamiento, el fuego, la descarga eléctrica y el mal funcionamiento en caso de que entren en contacto.
incluso hacer que la recarga no esté disponible. Por lo tanto, por favor límpielos periódicamente. 1.4 Precauciones comunes Teléfono móvil: •Por favor, utilice el teléfono en un entorno con una temperatura entre -20°C y 45°C y humedad de <75%. •Utilice el teléfono lejos de los teléfonos convencionales,televisores y equipos de automatización de oficinas, para evitar afectar el uso normal de estos equipos y del teléfono móvil.
2. CONOCE TU TELÉFONO TÁCTIL El número de iconos en el escritorio principal o el menú principal será de acuerdo con la cantidad de aplicaciones instaladas en su dispositivo. 1. Cámara frontal 2. Auricular 3. Sensor de proximidad 4. Pantalla LCD 5. Botón Configuración / Inicio / Atrás 6. Botón de encendido / apagado 7. Botón de volumen 8. Conector de auriculares 9. Conector USB 10. Cámara trasera 11. Flash LED 12. Altavoz 13.
3. PONER EN FUNCIONAMIENTO EL DISPOSITIVO •Asegúrese de que el dispositivo esté apagado. •Sujete firmemente el dispositivo con el panel frontal hacia abajo. •Deslice el dedo en la ranura diseñada para abrirla y tire suavemente de la cubierta posterior. Para instalar la tarjeta SIM •Localice la ranura de la tarjeta SIM y, a continuación, inserte la tarjeta SIM con sus contactos de oro ysu esquina de corte como se muestra en el diagrama.
Carga de la batería Las baterías nuevas se envían parcialmente cargadas. Antes de empezar a usar el dispositivo, se recomienda que cargue la batería. Nota: Solo se deben utilizar el adaptador de CA y el cable de sincronización USB suministrados con el dispositivo para cargar el dispositivo. Conecte el conector USB del adaptador de CA al conector de sincronización del dispositivo y, a continuación, conecte el adaptador de CA a una toma de corriente para empezar a cargar la batería.
4.2. Notificaciones de la pantalla de inicio (1) Lea sus notificacionescuando vea una notificación en la barra de estado, toque la barra y deslice el dedo por la pantalla para abrir la lista de notificaciones que se muestra en la ventana deslizante. Las notificaciones en curso informan de actividades como el desvío de llamadas ON, el estado actual de la llamada, la reproducción de canciones.entre otras. Las notificaciones informan de la llegada de nuevos mensajes, eventos de calendario y alarmas.
4.3. Cámara Todas las imágenes que puede capturar o ver en su teléfono se pueden almacenar en una tarjeta de memoria, que debe estar instalado en su teléfono. Antes de utilizar la cámara o ver imágenes se recomienda tener una tarjeta instalada. 4.4. Red GPRS/Inalámbrica Las capacidades de red de su dispositivo le permiten acceder a Internet o a su red corporativa a través de conexión inalámbrica WLAN, GPRS, EDGE o WCDMA. (Si disponible) También puede agregar y configurar una conexión VPN o proxy.
Paso 3: Abrir el WLAN en otros teléfonos táctiles u ordenadores, buscar el WLAN que su teléfono como un punto de acceso inalámbrico, a continuación, introduzca la contraseña, por la forma en que se puede reproducir en red. 4.5. Almacenamiento en U-disco Este teléfono admite almacenamiento móvil con la función U-disk. Cuando se cambia el teléfono activado, verá el icono en la barra de estado en la parte superior de la pantalla cuando está conectado a un PC mediante una línea de datos.
Antes de usar el teléfono como un dispositivo BT, debe emparejar el teléfono con el dispositivo de destino. De la siguiente manera: -Asegúrese de que su teléfono tiene BT-habilitado. -Toque "Buscar dispositivos." Los dispositivos BT dentro del alcance del teléfono comenzarán a escanear. -Toque el dispositivo que desea emparejar, para confirmar la contraseña para completar el emparejamiento Puede utilizar BT para compartir las imágenes, vídeos o archivos de música con familiares y amigos 4.
Cualquier Cambio o modificación no aprobado expresamente por la parte responsable del cumplimiento podría anular la autoridad del usuario para operar el equipo. 15.105 Información al usuario. Nota: Este equipo ha sido probado y se ha comprobado que cumple con los límites para un dispositivo digital de Clase B, de conformidad con la parte 15 de las Reglas de la FCC. Estos límites están diseñados para proporcionar una protección razonable contra interferencias dañinas en una instalación residencial.
Fcc RF Exposición Información y Declaración El límite SAR de EE.UU. (FCC) es de 1,6 W/kg promediado sobre un gramo de tejido. Este dispositivo fue probado para operaciones típicas de desgaste corporal con la parte posterior del microteléfono mantenido a 1.0 cm del cuerpo. Para mantener el cumplimiento de los requisitos de exposición a RF de la FCC, utilice accesorios que mantengan una distancia de separación de 1,0 cm entre el cuerpo del usuario y la parte posterior del microteléfono.