User's Manual

ManualsBrandsS.E.M. INDUSTRIES ManualsElectronicsMicro Hi-Fi System

E-2

CAUTION

DO NOT EXPOSE TO DRIPPING

OR SPLASHING LIQUIDS!

CAUTION: INVISIBLE LASER RADIATION WHEN OPEN AND

INTERLOCKS DEFEATED. AVOID EXPOSURE TO BEAM.

VORSICHT: UNSICHTBARE LASERSTRAHLUNG TRITT AUS,

WENN DECKEL GEÖFFNET UND WENN SICHERHEITSVERRIEGELUNG

ÜBERBRÜCKT IST. NICHT DEM STRAHL AUSSETZENI.

VARNING: OSYNLIG LASERSTRÁLNING NÄR DENNA DEL ÄR ÖPPNAD OCH

SPÄRR ÄR URKOPPLAND. STRÁLEN ÄR FARLIG.

ADVARSEL: USYNLIG LASERSTRÁLING VED ÁBNING. NÁR

SIKKERHEDSAFBRYDERE ER UDE AF FUNKTION. UNDGÁ UDS/ETTELSE FOR

STRÁLING.

ATTNENZIONE: RADIONS LASER INVISIDILE. NON GUARDARE

DIRETTAMENTE NELLA SORGENTE DEL LASER.

ACHTUNG: LASERLINSE NICHT BERÜHREN UNSICHTBARER LASERSTRAHL.

AVISO: A LENTE NUNCA DEVE SER TOCADA.

PLEASE NOTE: YOU WILL FIND THE RATING

LABEL FOR THIS PRODUCT LOCATED ON

THE BOTTOM OF THE UNIT.

CAUTION: GROUNDING OR POLARIZATION. THE PRECAUTIONS SHOULD BE TAKEN SO THAT

THE WIDER BLADE OF THE AC PLUG MUST MATCH THE SLOT IN RECEPTACLE "WALL SOCKET".

CLASS 1 LASER P RODUCT

KLASSE 1 L ASER P RODUKT

LASER DE C LASSE

LASER DI P RIMA C LASSE

KLASSE 1 L ASER

LASER PRIMERA CLASE

LASER CLASSE 1

KLASSE 1 L ASER P RODUKT

WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE

TO DRIPPING OR SPLASHING LIQUIDS.

THE MAINS PLUG IS USED AS THE DISCONNECT DEVICE AND IT SHALL REMAIN READILY OPERABLE.

TO COMPLETELY DISCONNECT THE POWER INPUT, THE MAINS PLUG OF TH E APPARATUS MUST BE

DISCONNECTED FROM THE MAINS COMPLETELY. THE MAINS PLUG SHOULD NOT BE OBSTRUCTED

OR SHOULD BE EASILY ACCESSED DURING INTENDED USE.

The lightning flash and arrowhead within the triangle is a warning sign

alerting you of "dangerous voltage" inside the product.

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

WARNING:

To reduce the risk of electric shock, do not remove cover (or back). No

user-serviceable parts inside. Refer servicing to qualified service personnel.

CAUTION:

The exclamation point within the triangle is a warning sign alerting you of

important instructions accompanying the product.

THE APPARATUS SHOULD NOT BE EXPOSED TO DRIPPING OR SPLASHING AND NO OBJECTS

FILLED WITH LIQUIDS SHOULD BE PLACED ON THE APPARATUS.

UNDER THE INFLUENCE OF ELECTROSTATIC PHENOMENON, THE PRODUCT MAY MALFUNCTION

AND USER TO POWER RESET.

THE MARKING AND RATING LABEL IS LOCATED AT THE BOTTOM OF UNIT ENCLOSURE OF THE APPARATUS.

- KEEP MINIMUM DISTANCES (5cm) AROUND THE APPARATUS FOR SUFFICIENT VENTILATION.

- THE VENTILATION SHOULD NOT BE IMPEDED BY COVERING THE VENTILATION OPENINGS

WITH ITEMS SUCH AS NEWSPAPER, TABLE-CLOTHS, CURTAINS ETC.

- NO NAKED FLAME SOURCE SUCH AS LIGHTED CANDLES SHOULD BE PLACED ON THE APPARATUS.

- ATTENTION SHOULD BE DRAWN TO THE ENVIRONMENTAL ASPECTS OF BATTERY DISPOSAL.

- BATTERY SHALL NOT BE EXPOSED TO EXCESSIVE HEAT SUCH AS SUNSHINE, FIRE OR THE LIKE.

WHEN ELECTROSTATIC DISCHARGE (ESD) OCCURS AT THE FRONT SURFACE (WHETHER METAL OR

PLASTIC) OR NEAR ANY PART OR ANY BUTTON OF THIS UNIT, OR AT THE USB PORT AND/ OR SD-CARD

SLOTS (IF THEY EXIST ON THIS PRODUCT), THERE MAY BE A POSSIBILITY THAT THE PRODUCT

MAY STOP OPERATION AND/ OR SHUT DOWN IMMEDIATELY. THIS IS A NORMAL CONDITION AND

INTENDED TO PROTECT THE UNIT AND INTERNAL COMPONENTS AGAINST DAMAGE.

IN SUCH A CASE, PLEASE RESET THE UNIT (BY DISCONNECTING AND RECONNECTING AC-POWER

SOURCE) TO REVERT THE UNIT TO NORMAL OPERATION.

ELECTROSTATIC DISCHARGE (ESD) PRECAUTION

Micro Digital CD Radio HI-FI System

USER MANUAL

MODEL: Z-255-BTPFU5W

Summary of content (6 pages)

PAGE 1
The lightning flash and arrowhead within the triangle is a warning sign alerting you of "dangerous voltage" inside the product. CAUTION USER MANUAL RISK OF ELECTRIC SHOCK DO NOT OPEN WARNING: To reduce the risk of electric shock, do not remove cover (or back). No user-serviceable parts inside. Refer servicing to qualified service personnel. CAUTION: The exclamation point within the triangle is a warning sign alerting you of important instructions accompanying the product.
PAGE 2
IMPORTANT SAFETY INSTRUCTIONS 1. READ INSTRUCTIONS - All the safety and operating instruction should be read before the product is operated. 2. RETAIN INSTRUCTIONS - The safety and operating instruction should be retained for future reference. 3. HEED WARNINGS - All warning on the product and in the operating instructions should be adhered to. 4. FOLLOW INSTRUCTIONS - All operating and use instructions should be followed. 5. CLEANING - Unplug this product from the wall outlet before cleaning.
PAGE 3
POWER SUPPLY - THIS SET WORKS ON NORMAL HOUSEHOLD AC-POWER. - INSERT THE PLUG OF THE AC-CORD INTO A WALL OUTLET WITH AC-POWER. - PRESS THE "ON/ STANDBY" KEY TO SWITCH “ON” THE UNIT. - PRESS AND HOLD THE "ON/ STANDBY" KEY 3 SECONDS TO SWITCH THE UNIT TO STANDBY MODE. - THIS UNIT IS DESIGNED TO OPERATE WITHOUT BEING TOTALLY POWERED "OFF". IT WILL EITHER BE "ON" OR IN "STANDBY” MODE.
PAGE 4
OPER ATION OF RADI O ALARM FUNCTION - THIS SET HAS A ALARM FUNCTION TO ENABLE YOU T O PROGRAM THE UNIT AS A WAKE-UP ALARM CLOCK : HOW TO SET TIMER 1. IN STANDBY MODE, PRESS ALARM SET KEY ONCE. 2. PRESS TUNE UP OR TUNE DOWN TO ADJUST THE HOUR OF THE DESIRED "ON" TIME AND THEN PRESS ALARM SET KEY TO CONFIRM. 3. PRESS TUNE UP OR TUNE DOWN TO ADJUST THE MINUTES OF THE DESIRED "ON" TIME AND THEN PRESS ALARM SET TO CONFIRM. 4. NOW THE WORDING IN THE DISPLAY CHANGES TO SHOW " " (BUZZER ALARM). 5.
PAGE 5
INSERTION & REMOVAL OF DISCS - WHEN OPENING THE CD-DOOR, ALWAYS ENSURE THE DISC IS NOT IN MOTION (NOT SPINNING) WHEN YOU OPEN THE CD-DOOR. ALWAYS PRESS STOP KEY TO STOP THE DISC SPINNING FIRST. - PLACE A CD INTO THE COMPARTMENT WITH THE LABEL-SIDE (PRINTED SIDE OF DISC) FACING UPWARDS. PRESS DOWN IN THE CENTER PART OF DISC UNTIL THE DISC "LOCKS" ONTO THE CENTER SPINDLE. - WHEN THE CD HAS BEEN PLACED ONTO THE CENTER SPINDLE, GENTLY LOWER THE CD-DOOR DOWNWARDS UNTIL IT LOCKS SHUT.
PAGE 6
BLUETOOTH® WIRELESS PLAYBACK THE UNIT CAN WIRELESSLY STREAM AUDIO FROM ANY BLUETOOTH ® DEVICE WITHIN 30 FEET. SIMPLY PAIR THE DEVICE AND ENJOY WIRELESS PLAYBACK AND CONTROL FROM YOUR BLUETOOTH® DEVICE. PREPARE THE UNIT: - TURN THE UNIT ON BY PRESS THE ON/ STANDBY KEY - PRESS THE FUNCTION KEY TO SELECT “BT” MODE. - THE BT SYMBOL WILL BE FLASHING TO INDICATE PARING IS PENDING. THE BT SYMBOL WILL REMAIN LIT CONTINUOUSLY WHEN PAIRED. *NOTE ONLY ONE DEVICE CAN BE PAIRED AND HAVE PLAYBACK FROM AT ANY GIVEN TIME.