Setup Manual

Laser Sensing Wireless Controller
Laser Chu-B Lip Basic Setup Manual Text
1. Product Information
The wireless, laser sensor controller links your movements with the game
movements. By using the laser sensor, it can finely measure the distance
between the laser sensor and an object. Now, you can have a sense of unity
with the game you could never have felt before.
2. Basic Operating Procedure
・ Put in batteries.
Remove the lid from the battery box, and place two AAA batteries in
the correct direction in the device.
・ Perform a connection test
Plug in the enclosed USB receiver into your PC, and turn the device’s
power to ON. (Power will turn on when you press and hold the center
〇button for around two seconds.)
If the device can correctly identify the PC, the LED light will turn
blue. If it is not identified, the LED light will turn red.
Once connected, turn the sensor’s power to ON. (Slide the slide switch
at the bottom of the 〇 button from right to left to turn on the
sensor’s power.)
If the sensor is turned on, the LED light will switch from blue to
green. After checking the sensor’s power supply, slide the slide switch
to the right and press and hold the 〇 button to turn off the power of
the device.
・ Startup
Turn on the device’s power again and start the game program you
want to play.
- If the LED light is blue, you can do the following:
□ Turn the stick and move the cursor
□ Press the stick and select