UWB Intrusion Detection Sensor URS-0030 User’s Manual Written By Sensor research team S-1 CORPORATION 168, S1 BUILDING, SOONHWA-DONG, JOONG-GU, SEOUL, KOREA Tel: +82 1588 3112 Fax: +82 2 2131 8869 Website: www.s1.co.kr Revised: March 2013 CAUTION!! • This equipment may only be operated Indoors. • Do not use to Outdoors. • Do not intentionally install aimed at windows or outside opening doors.
Table of Contents Introduction …………………………………………………………….1 Information to the user.……………………………………………….1 Features of the UWB Sensor....……………………………………...2 Coverage of the UWB Sensor.……………………………………….3 UWB Sensor Specifications………………………………………….4 Configuration and Installation……………………………………….5 Operational precautions……………………………………………...
Introduction The UWB(Ultra Wide Band) sensors refers to a kind of radar technology that was traditionally used in military applications. When used as a security means, it’s low power, wide band characteristics often causes frequent false alarms. Overcoming such limitations with its excellence in technology, S1 showcases the first ever UWB-based security sensor in the world.
Features of the UWB Sensor The diagram below shows several important features of the UWB Sensor: UWB Antenna GB-41 (Option) Lens LED [SET] Terminal (Power, COM) Magnetic Switch Point Rotary Switch Label (Certification) Label (System) [TOP] 2 [BOTTOM] UWB Intrusion Detection Sensor – URS-0030
Coverage of the UWB Sensor Maximum detection area of the sensor is as follows: Horizontal View 2~3m(6.56~9.84ft) Vertical View 1.5~10m(4.92~32.
UWB Sensor Specifications The specification of the sensor refer to the following table: Model URS-0030 Colors URS-0030W : White Detection Method Impulse Radio(Ultra Wide Band) Coverage Wide: 8m x 10m(26.24 x 32.80ft), 80˚ Wide Mounting Height 2.0 ~ 3.0m(6.5 ~ 10ft) Detection Speed 0.3 ~ 1.5m/sec.(1 ~ 5ft/sec.) LED Alarm Indicator On Alarm Period Approx. 2 sec. Alarm Output N.C, 12VDC, 0.3A max. Warm-up Period Approx. 60 sec. Power Supply 12VDC(9.6 ~ 14.
Configuration and Installation The configuration of the sensor are as follows: SENSOR [TOP] [BOTTOM] OPTION [Bracket] Assembly process are as follows: 1 Step - Assemble “Bottom” and “GB-41” 2 Step - Assemble “Top” and “Terminal” 3 Step - Assemble “Top” and “Bottom” 5 UWB Intrusion Detection Sensor – URS-0030
Operational precautions • Do not apply voltages higher than the rated voltage. • When swaying objects(mobiles of metal material), in the detection area, change the direction or adjust the detection distance. AC110V • Do not install where pet dogs and cats. • Do not install in the swaying wall. . • Do not install the outdoor. 6 • Do not install the curtain(blind) by the external wind swaying.
