Mode! : Fingerprint attendance & absence Reader (CIR-0191) Written Date : 2003. 4. 24. S1 Corp. R&D Center S1-Q5-C024-1100 51 Corp.
Table of Contents overview structure 2.1 Machine Structure 2.2 System Structure 2.3 Machine Block Diagram 2.4 Machine Outline Diagram specification 3.1 Outline Structure 3.1.1 Form 3.1.2 Outline & Inner Deployment Diagram 3.1.3 Size 3.1.4 Weight 3.2 Electrical Specification 3.2.1 Power 3.2.2 Input/Output 3.3 Machine Specification Overview 3.4 Display Specification 3.4.1 LED Display Specification 3.4.2 Keypad & Button Specification 3.4.3 LCD Display Specification 3.4.4 Buzzer sound Specification 3.4.
.8 Total Interface Connection Diagram 3.8.1 SIMS Connection 3.8.2 Operating System Connection 4 Function 4.1 Function List 4.2 Register Function List 4.2.1 Master Fingerprint/Card Register, Modification and Deletion 4.2.2 User Fingerprint/Card Register and Deletion 4.2.3 Setup communication type with upper machine 4.2.4 Time Setup Function 4.2.5 Security Level Setup Function 4.2.6 Access Door Setup Function 4.2.7 All Information Deletion 4.3 Authentication Function 4.3.
5.Modification 5.1 Register Modification 5.2 Use Modification 5.83 Main Menu Structure & Modification Specification 6.Communication Specification 7.8/W Version FACE S1-Q5-C024-1100 S81 Corp.
overview BM This system is B-Type attendance & absence system for smart card. Avoiding attendance & absence modification coming from misuse of RF Card of Attendance & Absence Reader, this system uses both card input method and "Card + Fingerprint® input method for user authentication.
structure 2.1 Machine Structure This machine's structure is as follows. 1 COR-0191 1EA Main Body 2 T f bod 1 2 ype oF body connect Each 2EA Connect a body with wal screw 3 LAN CABLE ASS'Y 1EA LAN cable for server connect SIMS and Power cable 4 Power CABLE ASS'Y 2EA # 1 of about 2 is connected with body when delivered.
2.2 System Structure ~. Connect B-Type Fingerprint attendance & absence Reader with SIMS. (Using RS-422 Communication) : Local /Lock/Shutter controller and 4 line is connected. [ Fingerprint L SIMS | superabundance Reader < Terminal : 4EA > -. Power : DC 12/24Y, GND .
—. Connect B-Type Fingerprint attendance & absence Reader with Operating system (Using LAN) fain bb | | Issue Program | Server | x.
P.
3.Specification 3.1 Outline Structure 3.1.1 Form Indoor use 3.1.2 Outline & Inside deployment Refer Outline & Inside deployment diagram 3.1.3 Size 170 x 115 x 48 (mm) [Width x Height x Depth] 3.1.4 Weight About 445 ¢g 3.2 Electrical Specification 3.2.1 Power (1) Voltage : DC 12 V(DC / DC 24 V(DC (2) Current : Normal 510mA / Card reading 810mA (12V supply) Normal 270mA / Card reading 350mA (24V supply) 3.2.2 Communication Specification (1) SIMS Connection -. Rs-422 (2) Operating System Connection —.
3.
3.4 Display Specification 3.4.
3.4.2 Keypad & Button Specification —. Keypad : key Ent, Esc, Attendance, Leave, Airing, Return) Use when register modification and ID input Ent Button + Setup input © Use when setup data input + Set © Set/Cancel when SIMS use -. Esc Button * Back Space Function : Back Function when keypad input * Previous menu Function : Move to previous menu when Esc button pushed * Home menu Function : Pushing for 2 sec.
~ RF Only, RF + Fingerprint voice message. 1 1 1 Set 2 2 2 Cancel 3 3 3 Abnormal |C Chip abnormal and 4 4 15 Check Digit Error 5 5 5 Card operation when set Unregistered card or access 6 8 14 denied door try Try to change set/cancel mode by using access only card. 9 9 15 Lost card 10 10 15 Trace number access try.
3.4.5 Guide voice specification 1 Guard is set. Set 2 Hello? Guard is canceled Cancel Beep!Beep!Beep! Guard can not be set. Enter the 3 room, check abnormalities and handle the Abnormal machine again. IC Card Chip error & 4 Card abnormalities are found. Check Digit Er Oral . . Card operation when 5 Guarding status. First, cancel the guard, Set Unregistered card or 6 Your card is not permitted.
3.6 Fingerprint Sensor Module Specification Module Model OPPONENT Fingerprint Sensor Type Optimistically Image Sensor) Fingerprint Spenser Area 12.8 X 15.2 (mm) Module Size 21(W) x 32(L) x 62(H) {mm) Less than 1 sec. (From getting Fingerprint fingerprint image to authentication For registered user Authentication | complete, This does not include the less than 20 when 1:N Time communication delay time caused by connection, connecting upper machine.) Resolution 505 + 10 (dpi) Data Size 400 bytes FRR 0.
3.5 B-Type RF Card Reader Module Specification 3.5.1 Electrical Specification ~. Power : This module is supplied Analogical) power. Digital (5V) power separately, No. Type Input Voltage Current -.N I+ 90mA : Analog [0.6 ~ 14.4v oral = vom —. Reading : 200mA 2 Digital 4.8 ~ 5.2v —. 100mA 3.5.2 Reading Distance & Time =. Minimum reading distance @ 25mm. —. No Dead Zone (less than 5mm permitted). —. Reading Time : 200ms. —. The same card data is not re—transmitted in 2500ms. -.