User's Manual For Smart Card Reader(CDR-0130) S1 CORPORATION
Smart Card Reader(CDR-0130) Smart card reader is a machine controlling access management and making block mode change in GBMS. Power is supplied by auxiliary power equipment or local controllerâ…¡. lock controller. Access management function transmits the data to lock controller as it reads recorded data in card by the method of making customer or traverse card approach to card reader.
Beep sound & Guiding voice Trough speaker, guiding voice is given as followings. And beep sends confirming sound. NO Working Type Working condition Stopping Condition At normal input of card 1 Beep sound data, one time working (ON for 200ms) 2 Guiding voice No guiding voice at normal At card manupulating access approval Guiding voice NO Contents 1 The system has been armed. 2 Hello! The system has been disarmed. Remarks Set Cancel Peep! Peep! Peep! You cannot arm the system.
FCC Regulatory Compliance : Notices Class B Equipment This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.