Product Info

ManualsBrandsRytera ManualsElectronicsTwo way radio

ATTENTION

The radio is a multi-task FRS transceiver. Combining the latest technology in radio communication along with a sturdy

mechanical frame, radio is the ideal and effective solution for the professionals who need to stay in touch with the working

team (in construction sites, buildings, shows, trade fairs or hotels) or for leisure users that just want to keep contact with

friends and family.

To help you ward off bodily injury or property loss that may arise from improper operation, please read all the information

carefully before using our products.

FCC RF EXPOSURE

WARNING! It is up to the user to properly operate this radio transmitter to insure safe operation. Please adhere to the

following:

Do not use the radio with a damaged antenna. If a damaged antenna comes into contact with the skin, a minor burn may

result.

This radio complieswith IEEE and ICNIRP exposure limits for occupational/controlled RF exposure emvironment at operating

duty factors of up to 50% and is authorized by the FCC for occupational use only. An appropriate warning lable is affixed to all

units. In order to comply with RF exposure requirements,a minimum distance of 2.5cm must be maintained when

held-to-face, and body-worn operations are restricted to the approved original acessories (belt clip)a minimum distance of 0

mm. Do not use this device when antenna shows obvious damages.

■ Hand-Held Operation (Held-to-Face)

This device was evaluated for typical hand-held (held-to-face) operations with a 1 inch spacing from the front of the radio.

For hand-held operation, the radio should be held 1 inch from the user's face in order to comply with FCC RF exposure

requirements.

■ Body-Worn Operation

This device was evaluated for body-worn operations with the supplied belt-clip accessory. (All necessary accessories are

Summary of content (12 pages)

PAGE 1
ATTENTION The radio is a multi-task FRS transceiver. Combining the latest technology in radio communication along with a sturdy mechanical frame, radio is the ideal and effective solution for the professionals who need to stay in touch with the working team (in construction sites, buildings, shows, trade fairs or hotels) or for leisure users that just want to keep contact with friends and family.
PAGE 2
included in the package; any additional or optional accessories are not required for compliance with the guidelines.) Third party accessories (unless approved by the manufacturer) should be avoided as these might not comply with FCC RF exposure guidelines. FCC COMPLIANCE ■ FCC PART 15 COMPLIANCE This device complies with Part 15 of the FCC Rules. Operation is subject to the condition that this device does not cause harmful interference.
PAGE 3
regular basis. 2. It is recommended to charge the battery under 5℃~40℃. Violation of the said limit may cause battery life reduction or even battery leakage. 3. To charge a battery attached to the product, turn it off to ensure a full charge. 4. Do not remove the battery or unplug the power cord during charging to ensure a smooth charging process. 5. Do not dispose of the battery in fire. 6. Do not expose the battery to direct sunlight for a long time nor place it close to other heating sources. 7.
PAGE 4
• When using regulated power supply, take notice of power voltage that must be 5V to avoid damages. • High temperatures can shorten the life of electronic devices, and warp or melt certain plastics. Do not store the radio in dusty or dirty areas. • Keep the Radio dry. Rainwater or damp will corrode electronic circuits. • If it appears that the Radio diffuses peculiar smell or smoke, please shut off its power immediately and take off the charger or battery from the Radio.
PAGE 5
reception can be determined by turning it off and then on. The user is encouraged to try to correct the interference by one or more of the following measures: - Reorient or relocate the receiving antenna. - Increase the separation between the equipment and receiver. - Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. - Consult the dealer or an experienced radio/TV technician for help.
PAGE 6
Package Contents • 2 Transceiver • 2 Belt clip • 2 1200mAh Li-ion rechargeable battery pack • 2 Desktop charger • 1 User Manual Note: The number of the above materials may be depending on the number of packages. Main characteristics • FRS Transceiver (No license required) • Output power: Max 1.3W • Channel spacing: 12.
PAGE 7
The Battery power saving feature enables a reduction in consumption of up to 50%. If it has been set, it automatically activates when the transceiver does not receive any signal for more than 5 seconds in order to save the battery life. Power saving can be disabled only through Programming software.
PAGE 8
1. Antenna 2. Encoder: rotate clockwise or counter-clockwise to select the desired channel 3. Power/volume knob-turn clockwise to power on and increase the volume level. Turn counter-clockwise to decrease the volume level and power off. 4. Speaker 5. Built-in microphone 6. Led indicator: RED: TX; GREEN: RX. 7. PTT: push this button to transmit, release it to receive. 8. Side key 1: hold down this button to activate the Monitor function. 9.
PAGE 9
Monitor The Monitor feature is for excluding (opening) the Squelch, in order to listen to signals that are too weak to keep the Squelch permanently opened. Hold down the Side key 1 to enable such function. Scan To enable the Scan function, the scanning will automatically start. Whenever any signal is detected, the scanning will stop on a busy channel. If the PTT is pressed, you will transmit on the latest busy channel; therefore if you don’t pick up any signal when you press PTT, the radio will transmit.
PAGE 10
Appendix A. – Trouble shooting guide Phenomena You cannot turn on the radio. During receiving, the voice is weak or intermittent. You cannot communicate with other group members. You hear unknown voices or noise. You are unable to hear anyone because of too much noise and hiss. Analysis Solution The battery may be installed improperly. The battery power may run out. The battery may suffer from poor contact caused by dirty or damaged battery contacts. The battery voltage maybe low.
PAGE 11
Appendix B. – Technical Specifications General Part Frequency Range Working temperature Operation Voltage Operation Mode Dimensions Weight Antenna Impedance Duty cycle FRS -20℃ to +50℃ DC 3.7 V ±10% Simplex 162mm×55mm×31mm (with Antenna) 147g (Battery pack included) 50ohm 5/5/90% Transmitter Part RF Output Power FM Modulation Adjacent Channel Power Transmission current ≤1.3W (Max) 11K0F3E@12.5KHz 60dB @ 12.
PAGE 12
Appendix C. - Channels and Frequencies CH.No CH.Freq. CH.No CH.Freq. 1 462.5625 8 467.5625 2 462.5875 9 467.5875 3 462.6125 10 467.6125 4 462.6375 11 467.6375 5 462.6625 12 467.6625 6 462.6870 13 467.6870 7 462.7125 14 467.7125 Note：Ch 8-14 must not exceed 0.5W.