User's Manual

ManualsBrandsruwido austria ManualsElectronicsRF Remote Control

ruwido austria gmbh . Köstendorfer Str. 8 . Austria . t +43 6216 4571-0 . www.ruwido.com Page 1 of 5

This document is intellectual property of ruwido austria gmbh and contains confidential information. Reproduction, modification,.

Revision Status

Version Creation Date Author Remarks

V0.1 08 June 2013 Ralph Leblhuber

rf ruwido remote control and

rf2ir dongle user guide

DRAFT

Summary of content (5 pages)

PAGE 1
rf ruwido remote control and rf2ir dongle user guide DRAFT Revision Status Version Creation Date Author V0.1 08 June 2013 Ralph Leblhuber Remarks ruwido austria gmbh . Köstendorfer Str. 8 . Austria . t +43 6216 4571-0 . www.ruwido.com Page 1 of 5 This document is intellectual property of ruwido austria gmbh and contains confidential information. Reproduction, modification,. communication to third parties and any other use is strictly prohibited without prior written accordance of ruwido austria.
PAGE 2
user operating instructions for rf remote control and rf2ir dongle 1. Pairing of rf2ir dongle and remote control (1) rf2ir dongle Press “play/pause” and “ok” keys simultaneously for 5 seconds – red STB LED will flash. Plug in the rf2ir dongle (1) to an available USB port of your Set Top Box (2) within 30 seconds. Once paired the red LED will flash twice quickly and then stop. The remote control and the dongle are paired.
PAGE 3
2. Programming your TV Before you start to program your remote control, make sure your TV and set top box are switched on. Preparation: To speed up your programming process, the most used TV brands have 4digit code that will be used in the programming process. Search for the 4-digit code of your TV brand. In case your TV brand is not listed please use code 0 0 0 1 to search for all brands. Please note that the search can take up to 15 minutes in that case.
PAGE 4
Notes: factory default setting: no TV is programmed once TV is programmed, volume (vol+, vol- and mute) will be controlled via the TV for STB commands the LED will flash red, for TV commands LED will flash green (only if TV set has been programmed) TV programming will remain if batteries are being removed / changed ruwido austria gmbh ruwido_r97_rf_quick_user_guide_v0.1-08june13-DRAFT Page 4 of 5 This document is intellectual property of ruwido austria gmbh and contains confidential information.
PAGE 5
DECLARATION User Information FCC 15.2: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. Part 15 Statement. FCC 15.19/RSS Gen Issue 3 Sect. 7.1.3 This device complies with Part 15 of the FCC Rules and with Industry Canada license-exempt RSS standard(s).