Installation Guide

ManualsBrandsRuvati ManualsKitchen33 in. Workstation Ledge 60/40 Double Bowl Undermount 16-Gauge Stainless Steel Kitchen Sink

RVH8356

RUVATI USA

www.ruvati.com

Features

Dimensions

In the Box

•

Sink

•

Wood Cutting Board

•

Stainless Steel Colander

•

Rollup Drying Rack

• Bottom rinse grid

•

Basket Strainer Drain

• 16 gauge stainless steel

• Premium 304 grade stainless steel

(18/10 Chromium/Nickel)

•

Brushed Stainless Steel finish

• Heavy duty sound guard padding and

undercoating

• Slanted bottom with elegant drain

grooves for easy draining

•

Zero Radius Inside Corners

• Drain placement - Rear

Undermount Stainless Steel

Kitchen Sink Double Bowl

Model

Number Width Length Depth

RVH8356 33” 19” 10”

Rev 11/16

Printed in USA

Page 1

•

Cutout Template

•

Mounting Brackets

Summary of content (4 pages)

PAGE 1
® RVH8356 Undermount Stainless Steel Kitchen Sink Double Bowl Features • • • • • • • 16 gauge stainless steel Premium 304 grade stainless steel (18/10 Chromium/Nickel) Brushed Stainless Steel finish Heavy duty sound guard padding and undercoating Slanted bottom with elegant drain grooves for easy draining Zero Radius Inside Corners Drain placement - Rear In the Box • • • • • • • • Sink Wood Cutting Board Stainless Steel Colander Rollup Drying Rack Bottom rinse grid Basket Strainer Drain Cutout Template
PAGE 2
® RVH8356 Attention Installer 1. Read these instructions carefully before installation. Inspect sink for damages. Do not install if the sink is damaged. 2. Ruvati recommends that installation of undermount sinks be done by a professional installer. 3. Templates are only provided as a guide. Place template on sink to ensure the template will give you the proper cutout for the sink. Ruvati is not responsible for improper sink or countertop installation.
PAGE 3
® RVH8356 Installation NOTE: The following instructions are for wood countertops. For granite, marble or solid stone countertops, ask your fabricator for installation instructions. 1. Place template on countertop. Position it such that the sink will have proper clearance from cabinet. 2. Trace a line around the template. Determine what “reveal” you want your sink to have (see previous page) and based on that, adjust the line accordingly. Cut along the line. 3.
PAGE 4
® RVH8356 Care and Maintenance • Clean regularly with normal detergent and warm water. • Always make a habit of drying your sink after use and buffing with a soft cloth. This will ensure that no build up of limescale or other mineral deposits can occur. • Clean the sink once a week using a nonabrasive cleanser such as Comet and a clean soft sponge. Scrub in the same direction as the natural grain of the sink. • Never let soap or other household cleaners to dry on the surface of the sink.