Instructions / Assembly

Hardware Included

As a courtesy, we have included basic drywall anchors and screws for your convenience. We recommend mounting this product on wall studs

for a more secure installation. When mounting on wall studs, you will NOT need to use the included anchors, as they will not be necessary; the

included screws will be sufficient. When mounting on hollow spaces on walls, make sure to use the included anchors and screws together.

RUSTIC STATE

SMITH LEDGE

Tools Needed

Box Content

Assembly Instructions

As a general rule, it’s always ideal to install the wall mountable products on wall studs without fasteners. If it isn’t possible, as a courtesy

we have included basic drywall anchors and screws for your convenience. However, different wall materials may require different anchors

and screws. If necessary, please obtain proper hardware suitable for your walls from your local hardware store.

STEP 1

WARNING: Please do not mount this item above cribs, beds or changing tables.

Ledge [×1]

Zinc anchor [×2] Silver combo screws [×2]Mini level [×1] Allen key [×1]

Easy

keyhole bracket

Marking

screw

Hold the wooden shelf and turn screws off for both side from

hanging bracket hook by using allen key.

(Screws should stick out enough to make marks on the wall

as shown).

PAGE 1
RUSTIC STATE SMITH LEDGE WARNING: Please do not mount this item above cribs, beds or changing tables. Hardware Included As a courtesy, we have included basic drywall anchors and screws for your convenience. We recommend mounting this product on wall studs for a more secure installation. When mounting on wall studs, you will NOT need to use the included anchors, as they will not be necessary; the included screws will be sufficient.
PAGE 2
STEP 2 STEP 3 Mini level Broken line down WALL WALL 0.25“ Place shelf at desired location on the wall by using mini level and press the shelf towards wall. The two marking screws on brackets will make accurate mark on the wall. (For future use, turn the marking screws back after the marking is complete). Install the anchors on the marked points. Insert screws into anchors, leave some 0.25inch out. STEP 4 Hang the shelf on the wall. 2 Make sure the shelf is 90 degree against wall.