Use and Care Manual

TECHNICAL DATA CAB-01
CABINET TRANSFORMATIONS
TM
Form: CS1796
Rev.: 043013
1
.DESCRIPTION AND USES .
Cabinet Transformations
™
is a process designed to re-
finish your worn or damaged cabinets with a four step
coating system. Cabinet Transformations is suitable for
kitchen and bathroom, or any other cabinet in your home.
Cabinet Transformations uses a system of an adhesive
bond coat, decorative glaze (optional), and a protective
clear top coat to create a highly durable finish.
Available in 35 finish colors. The color appropriate kit must
be tinted at the paint counter at time of purchase.
The Cabinet Transformations kit includes both an
instructional DVD and printed instructions to aid with the
process and coating application. The kit also includes:
• Deglosser
• Bond Coat
• Decorative Glaze
• Protective Top Coat
• Decorative Glazing Cloths
• Scrub Pads
• Stir Sticks
Items not supplied with the kit which need to be purchased
separately:
• (3) 2" Synthetic Paint Brushes – Premium Quality Angled
or Straight
• (1) 2" Foam Paint Brush (for optional glaze)
• Smooth Painter’s Tape (2" size)
• Drop Cloths
• Plastic Sheeting
• Disposable Gloves
• Lint-Free Rags
• Disposable Paint Containers
Suggested Items Needed:
• Screwdriver or Cordless Screwdriver
• Plastic Wood Filler and Putty Knife (if filling hardware
holes)
• Plastic or Cork Bumpers
• Plastic Cups or Baggies (for hardware)
• Sketch Paper and Marker
..PRODUCTS .
CABINET TRANSFORMATIONS
™
Small Kit Large Kit Description
258240 258242 Dark Kit (for dark color finishes)
258109 258241 Light Kit (for light color finishes)
263231 ---------- Espresso
263232 ---------- Pure White
263233 ----------- Cabernet
.PRODUCT APPLICATION .
Watch the entire instructional DVD and use the printed
instructions for the complete, step by step, procedure on
application of the materials.
IMPORTANT: Apply when air (ambient) temperature is 50-
90°F (10-35°C) and relative humidity is below 60%.
SURFACE PREPARATION
To obtain best results, take cabinet doors off hinges and
drawers out of frames. Remove all cabinet hardware,
including hinges, drawer pulls, and knobs. The surface of
the cabinets must be completely cleaned and de-glossed
in accordance to the instructions to ensure proper
performance of the Cabinet Transformations.
APPLICATION OF DEGLOSSER
To ensure optimum results and maximum adhesion of the
Bond Coat, make sure to be THOROUGH in deglossing
the cabinet doors, drawers, and frames.
IMPORTANT: When deglossing wooden cabinetry, follow
the grain pattern of the wood. Avoid scrubbing in a circular
motion. Wipe up any spilled Deglosser with a clean cloth.
APPLICATION OF BOND COAT
The Bond Coat is formulated to provide maximum
adhesion to wood, laminate, and melamine surfaces. Two
coats of Bond Coat are recommended.
IMPORTANT: There is enough Bond Coat to cover the
outer cabinet frame, each drawer front, and front and back
of each door with two coats. There is not enough to coat
the insides of the cabinets or shelves.