TDS

TECHNICAL DATA
PT2X-09
PAINTER’S TOUCH
®
2X ULTRA COVER ENAMEL SPRAYS
1
Form: ARJ-1684
Rev.: 101718
DESCRIPTION AND USES
Rust-Oleum
®
Painter’s Touch
®
2X Ultra Cover contains
technology that provides twice the coverage on wood, metal,
most plastic, wicker and more when compared to other
matching colors of Rust-Oleum general purpose paints:
Painter’s Touch, SPRAY N GO, Quick Color and Touch ‘n
tone. It covers surfaces with less spray passes, allowing
projects to be completed faster and easier. Any angle spray
feature allows you to spray in any direction, even upside
down. Fast Drying.
TIP: Some plastics made of polyethylene such as plastic
storage containers are manufactured in a way that may
hinder maximum paint adhesion. Test paint in a hidden area
first.
PRODUCTS
SKU
DESCRIPTION (Aerosol)
334049
Gloss Winter Gray
334048
Gloss White
334047
Gloss Warm Yellow
334046
Gloss Sun Yellow
334045
Gloss Spa Blue
334044
Gloss Sage Green
334043
Gloss Real Orange
334042
Gloss Purple
334041
Gloss Navy Blue
334040
Gloss Navajo White
334039
Gloss Meadow Green
334038
Gloss Kona Brown
334037
Gloss Khaki
334036
Gloss Key Lime
334035
Gloss Ivory
334034
Gloss Hunter Green
334033
Gloss Grape
334032
Gloss Deep Blue
334031
Gloss Dark Gray
334030
Gloss Colonial Red
334028
Gloss Candy Pink
334027
Gloss Brilliant Blue
334026
Gloss Black
334025
Gloss Berry Pink
334024
Gloss Apple Red
334023
Gloss Almond
346955
Gloss Marigold
334051
Gloss Cranberry
334050
Gloss Seaside
334058
Gloss Metallic Aluminum
PRODUCTS (cont.)
SKU
DESCRIPTION (Aerosol)
334052
Gloss Coral
334053
Gloss Ocean Mist
334054
Gloss Golden Sunset
334055
Gloss Spring Green
334057
Gloss Pink Peony
334056
Gloss Modern Mint
PRODUCT APPLICATION
Use outdoors or in a well ventilated area such as an open
garage. Use when temperature is between 50-90ºF (10-
32ºC) and humidity is below 65% to ensure proper drying.
Do not use on objects that may exceed 200ºF (93ºC) surface
temperature. Do not apply to galvanized steel. Avoid
spraying in very windy and dusty conditions. Cover
surrounding area to protect from spray mist.
SURFACE PREPARATION
Remove all dirt, grease, oil, salt and chemical contaminants
by washing the surface with a commercial detergent, or other
suitable cleaning method. Rinse with fresh water and allow
to thoroughly dry. Remove loose paint and rust with a wire
brush or sandpaper. Previously coated surfaces must be
sound and in good condition. Smooth, hard, or glossy
finishes should be scarified by sanding to create a surface
profile.
WARNING! If you scrape, sand or remove old paint from any
surface, you may release lead paint dust. LEAD IS TOXIC.
EXPOSURE TO LEAD DUST CAN CAUSE SERIOUS
ILLNESS, SUCH AS BRAIN DAMAGE; ESPECIALLY IN
CHILDREN. PREGNANT WOMEN SHOULD ALSO AVOID
EXPOSURE. Wear a NIOSH approved respirator to control
lead exposure. Clean up carefully with a HEPA vacuum and
a wet mop. Before you start, find out how to protect yourself
and your family by contacting the National Lead Information
Hotline at 1-800-424-LEAD or log on to www.epa.gov/lead.
PRIMING
Use of Painter’s Touch 2X Ultra Cover
®
primer provides
superior adhesion and hiding and is especially
recommended for bare wood and metal. The following
primers are recommended
334019
White Primer
334018
Red Primer
334017
Gray Primer