Use and Care Manual

ManualsBrandsRust-Oleum NeverWet ManualsPaint11 oz. NeverWet Outdoor Fabric Spray (6-Pack)

TECHNICAL DATA ROC-40

FABRIC

WATER REPELLING TREATMENT

Form: GDH-587

Rev.: 121614

.DESCRIPTION AND USES .

Rust-Oleum

NeverWet

™

Fabric is a one-step,

superhydrophobic, water repelling treatment designed to

keep items dry longer. This crystal clear formula allows

fabrics to breathe, while dramatically repelling water from

the surface. NeverWet Fabric preserves outdoor items

against damaging moisture without changing the look or

feel of the fabric.

NeverWet Fabric is ideal for use on leather, suede,

polyester, cotton/polyester blends and canvas fabrics. It is

suitable for use on shoes, patio furniture, backpacks,

gloves, camping gear and more.

. FEATURES .

 Repels water

 Breatheable

 Invisible protection

.PRODUCTS .

SKU Description

289372 NeverWet Fabric

.SPRAYING CONDITIONS .

Use outdoors or in a well ventilated area. Use when

temperature is above 10ºC and humidity is below 85% to

ensure proper drying. Avoid spraying in very windy and

dusty conditions. Cover surrounding area to protect from

spray mist.

.PRODUCT APPLICATION .

SURFACE PREPARATION

Apply to clean, dry articles.

.PRODUCT APPLICATION (cont.) .

APPLICATION

Do not shake. A test spray is recommended to obtain a

feel for the spray pattern. Test in an inconspicuous area

before application for colorfastness. NeverWet Fabric is

odourless when dry. Rotate nozzle to “ON” position. Hold

the spray bottle 30-40 cm from surface and coat the entire

object until wet. Do not soak or allow to puddle. If bubbles

appear, lightly dab with a clean, lint-free rag. Re-apply

seasonally or when needed. Note: Hydrophobicity is

dependent on textile. Do not use near open flame.

DRY & RECOAT

Dry and recoat times are based on 21ºC and 50% relative

humidity and will vary depending of the fabric. The coating

will be odourless when dry. Allow to dry for 24 hours

before exposing to water.

REMOVAL

If you wish to remove the NeverWet Fabric Water

Repelling Treatment, scrub the coated area with soap and

water until the superhydrophobic effect is gone.

CLEAN-UP

When finished spraying, wipe off tip before storing.

Properly discard empty container.

Summary of content (2 pages)

PAGE 1
TECHNICAL DATA ROC-40 FABRIC WATER REPELLING TREATMENT .DESCRIPTION AND USES . .PRODUCT APPLICATION (cont.) ™ ® APPLICATION Rust-Oleum NeverWet Fabric is a one-step, superhydrophobic, water repelling treatment designed to keep items dry longer. This crystal clear formula allows fabrics to breathe, while dramatically repelling water from the surface. NeverWet Fabric preserves outdoor items against damaging moisture without changing the look or feel of the fabric. Do not shake.
PAGE 2
TECHNICAL DATA PEEL STOP – NEVERWET FABRIC WATER REPELLING TREATMENT ™ .PHYSICAL PROPERTIES . NEVERWET FABRIC Resin Type Silicone Pigment Type NA Solvents Mineral Spirits Weight per Liter 0.79 kg Fill Weight 325 mL VOC 710 g/l Practical Coverage at Recommended DFT (assumes 15% material loss) Dry Times at 21-27ºC and 50% Relative Humidity Coverage will vary depending on fabric 2 2 5.