Owner's Manual
Intruduction
Thank you for purchasing the ALT-70V-50 volume control
from Russound. The ALT-70V-50 is designed to work
with commercial audio systems using either 70V or 100V
amplication. It’s manufactured with a high-quality
autoformer design for long life, excellent frequency response,
low heat build-up, in an easy-to-install package
Considerations
Amplier Type – The ALT-70V-50 can only be used with 70V or
100V ampliers Wattage Rating – The maximum wattage for
speakers being controlled by the ALT-70V-50 is 50 watts. For
example, if controlling 4 speakers tapped at 7.5 watts each,
the total would be 30 watts which is acceptable. If those
same 4 speakers were tapped at 15 watts each, the total
would be 60 watts and this would exceed the power rating of
this volume control.
Installation Location – The ALT-70V-50 is designed for
indoor use but may be installed outdoors if used with a
properly designed weatherproof device cover.
ALT-70V-50
Volume Control
Installation Manual
Specications
Power Handling: Up to 50 Watts total
Number of Steps: 11
Wire Gauge: Up to 12 ga AWG
Insertion Loss: <0.5 dB
Included Colors: White, light almond, ivory
Fits 1 Gang UL/CSA Approved 18 ci Junction Box
Wiring a single speaker
Wiring a multiple speakers
IN
OUTGROUND
Amplier
Speaker OUT
Volume Control Speaker IN
COM 25 70 100
IN
OUTGROUND
Amplier
Speaker OUT
Volume Control Speaker IN
COM 25 70 100
Speaker IN Speaker IN Speaker IN