Owner's Manual

RC-RF11D-1

Remote Control Operation Guide

IMPORTANT:

Read advisory information in the owner’s

manual carefully before using this product.

The potential for electrical shock exists if

electrical components are not installed or

operated properly.

FOOT UP BUTTON

Press and hold to raise the foot section.

FOOT DOWN BUTTON

Press and hold to lower the foot section.

FLAT BUTTON

Press and hold to lower the head and foot

sections simultaneously.

HEAD UP BUTTON

Press and hold to raise the head

section.

HEAD DOWN BUTTON

Press and hold to lower the head

section.

LIGHT BAR BUTTON

Press to turn on and off the light bar

at the bed.

FLASH LIGHT BUTTON

Press to turn on and off the flash light on

the remote controller simultaneously.

ANTI-SNORE BUTTON

Press to lift the bed to the

“ANTI-SNORE” preset profile.

M2 BUTTON

Press to lift the bed to the “M2” preset

profile

M1 BUTTON

Press to lift the bed to the “M1”

preset profile

ZERO-G BUTTON

Press to lift the bed to the “ZERO-G”

preset profile

PAGE 1
RC-RF11D-1 Remote Control Operation Guide HEAD UP BUTTON Press and hold to raise the head section. HEAD DOWN BUTTON Press and hold to lower the head section. LIGHT BAR BUTTON Press to turn on and off the light bar at the bed. ANTI-SNORE BUTTON Press to lift the bed to the “ANTI-SNORE” preset profile. M1 BUTTON Press to lift the bed to the “M1” preset profile IMPORTANT: Read advisory information in the owner’s manual carefully before using this product.
PAGE 2
Federal Communications Commission (FCC) Statement 15.19 This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: 1) this device may not cause harmful interference and 2) this device must accept any interference received, including interference that may cause undesired operation of the device. 15.105(b) This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC rules.