WARNING!!! Bes ABg Bey WARNING: TO PREVENT THE RISK OFFER ELECTRIC SHOCK BO ROT REMOVE COVER NO USER-SERVICEABLE PARTS INSIDE REFER SERVICING TO QUALIFIED SERVICE PERSONNEL 1.There may be electric shock dangerous when you don't operate or use this machine correctly, please strictly operate in accordance with its regulations. Except for the authorized repairing personnel, never open the back cabinet arbitrarily so as to avoid the dangerous of electric shock. 2.
5.Please pull out the batteries when not use DC power supply, so as to avoid batteries electronic leak liquid corroding the radio. 6.Don't use the batteries combined with new and old, or different category. Please put the dumped batteries at the place where indicate by government to avoid environment pollution.
POWER SUPPLY 1.AC power supply : Please connect the inlet of the AC cord with the socket jack and put AC cord plug into power socket on the wall. Note: 110V ~50Hz for US, 220V~50Hz for Europe 2.DC power supply: Please open the battery door, and put into PCs 1.5V UM-1 batteries, then close the battery door. Note: e On the safe side, please pull out the AC plug from power supplying before installing batteries. eo Please try to use the AC power supplying because the time is limited for batteries proving power.
RADIO OPERATION 1.Rotate the Volume Knob to turn on the radio and adjust the volume. 2.Select AM/FM/SW with Band Selector. Extend the antenna to get better signal. 3.Rotate the Tuning Knob on the right side to select a channel, the specific channel will display on the display panel while you are rotating. 4. If you don't want to disturb others, you also can chose the earphone to listen radio, just plug the earphone into the earphone jack.
SAFETY INSTRUCTIONS eo Dropping this radio can cause injury or damage. The unit will not resist strong impact or contact with corrosive liquids. e This radio is not waterproof. Keep this unit dry but stay away from direct sunlight, high temperature. e Do not rub against chemical fiber, silk or other electricity products which will make static easily. eo When cleaning the case, wipe with a soft cloth and detergent solution. Do not use strong solvents such as alcohol, benzine or thinner.