Model: RF421185/RF422185/RF425185 Free standing bathtub faucet Operators’ Manual Parts and Customer Services: info@runfinegroups.
Part list Part ① ② ③ ④ ⑤ ⑥ ⑦ ⑧ ⑨ ⑩ ⑪ ⑫ Parts description Main body Quantity 1 Straight tube 1 Decorative cover 1 Inlet tube 2 Bolts holder 1 Expansion bolts 3 Hand shower 1 Shower hose 1 Glove 1 Instruction 1 Screw tool 1 Adaptor 2
INSTALLATION MANUAL TOOLS REQUIRED BUT NOT INCLUDED Pipe tape Adjustable wrench Philips screwdriver Notes before installation : 1.Please check that all components are present. 2.Before installation ensure that all pipe lines are clear of sundries to block the faucet. 3.Ensure water pressure is between 20-125 PSI (includes combination of hot and cold hose lines). 4.If you will be away from home for an extended period you should shut off the main water supply. Daily maintenance: 1.
1.Connect ② the straight tube,③ decorative cover and ⑤Bolts holder to ④ Inlet tube, then screw ④ Inlet tube to ① the main body. Remark: ⑪ Screw tool only need to use When you need to clean the cartridge. 2.Connect ① the main body with ② the straight tube by twisting it. 3.Prepare the water inlet like the drawing illustrated (unit:mm).
4.Screw ⑫ the adaptors on the wateroutlet if you need, then connect ④ the inlet tube like the drawing. 5.Twist ⑤ the bolts holder to the faucet. 6.Drill holes on the floor based on the drawing.
7.Put 3 pcs ⑥ Expansion bolts onto ⑤ Bolts holder,tighten up the expansion bolts by wrench. 8.Twist ⑧ Shower hose to both main faucet and ⑦ hand shower. 9.Double check the entire installation for any leaks and make sure the faucet is functioning.