Ceramic Kamado Pellet Grill OWNER’S MANUAL OPERATING INSTRUCTIONS Model KP190124S NOTICE TO INSTALLER: LEAVE THESE INSTRUCTIONS WITH THE GRILL OWNER FOR FUTURE REFERENCE. WARNING READ ALL INSTRUCTIONS BEFORE INSTALLING AND USING APPLIANCE. FAILURE TO FOLLOW THESE INSTRUCTIONS COULD RESULT IN PROPERTY DAMAGE, BODILY INJURY OR EVEN DEATH. CONTACT LOCAL BUILDING OR FIRE OFFICIALS ABOUT RESTRICTIONS AND INSTALLATION INSPECTION REQUIREMENTS IN YOUR AREA. SAVE THESE INSTRUCTIONS.
IMPORTANT SAFETY WARNINGS WE WANT YOU TO ASSEMBLE AND USE YOUR GRILL AS SAFELY AS POSSIBLE. THE PURPOSE OF THIS SAFETY ALERT SYMBOL IS TO ATTRACT YOUR ATTENTION TO POSSIBLE HAZARDS AS YOU ASSEMBLE AND USE YOUR GRILL & SMOKER. WHEN YOU SEE THE SAFETY ALERT SYMBOL, PAY CLOSE ATTENTION TO THE INFORMATION WHICH FOLLOWS! READ ALL SAFETY WARNINGS AND INSTRUCTIONS CAREFULLY BEFORE ASSEMBLING AND OPERATING YOUR GRILL & SMOKER. WARNING Do NOT use in humid or wet conditions WARNING 1.
TABLE OF CONTENTS: General Warnings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-4 Operating the Grill . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-9 Proper Care and Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 Transporting and Storage. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 Grill Cooking Tips . . . . . . . . . . . . . . . . . . . . . .
GENERAL WARNINGS: WARNING When using electric appliances, basic safety precautions should always be followed including the following: • Operate only per manufacturers instructions. • Keep all combustible materials at least 60 inches (152.4 cm) away from the grill at all times. Do not use this grill under any overhang or near any combustible structures. • Minimum clearance from side and back of unit to combustible materials, 60 inches (152.4 cm) from side and 60 inches (152.4 cm) from back.
• This product is not designed for tabletop use. Do not set this product on a tabletop. • Do not cover cooking grate with aluminum foil. If you cover the grease tray with foil, do not block the openings between grease tray and grill body and cut a hole for grease drainage. • Do not block the exhaust on chimney. • Outdoor extension cords must be used with outdoor use products and are marked with suffix “W” and with the statement “Suitable for Use with Outdoor Appliances.
USE CAUTION AND COMMON SENSE WHEN OPERATING YOUR PELLET GRILL & SMOKER. FAILURE TO ADHERE TO THE SAFETY WARNINGS AND GUIDELINES IN THIS MANUAL COULD RESULT IN SEVERE BODILY INJURY OR PROPERTY DAMAGE. SAVE THIS MANUAL FOR FUTURE REFERENCE. OPERATING THE GRILL: WARNING Read and follow all warnings and instructions contained in the preceding sections of this manual.
滚滚长江东逝水 Step 2 Step 3 Step 4 Step 5 Step 6 Plug power cord into a GFCI (grounded) outdoor electrical outlet. Use only a GFCI (grounded) protected circuit, never remove the grounding plug or use with an adapter of 2 prongs; and use only extension cords with a 3 prong grounding plug, rated for the power of the equipment, and approved for outdoor use with a W-A marking. Open the pellet hopper lid. Make sure the auger is free from debris and other objects.
Follow these steps lf the grill does not ignite or if the fire in the fire pot goes out while cooking: Step 1 Turn the temperature control knob to “OFF” and unplug. Open cooking chamber lid and remove all food, cooking grate, grease tray and heat baffle plate. CAUTION: Some parts may contain sharp edges. Wear protective gloves if necessary. WARNING: Always use oven mitts/gloves to protect your hands. Metal parts become hot during use. Use extreme caution when handling cooking grate, grease tray and baffle.
OPERATING TIPS: • Your Pellet Grill should never be moved while it is hot. If you are transporting your grill in a vehicle after • The Pellet Grill is designed to operate with the lid closed. • The temperature readout is an approximate and can be affected by the following factors: outside ambient temperature, the amount and direction of wind, the quality of pellet fuel being used, the lid being opened, and the quantity of food.
COOK MODE: • The temperature dial can be changed at any time to increase or decrease the cooking temperature of the grill. • The 180°F to 250°F temperature settings are for slow cooking/smoking. • The 300°F to 450°F temperature settings are for grilling. • The 470°F to 500°F temperature setting is for searing.
• PROPER CARE & MAINTENANCE: Remove wood pellets from hopper if grill will not be used for a long period of time. Wood pellets can become soggy due to moisture/humidity and can cause the auger to bind up or not push pellets to burn chamber. Disposal of ashes - Ashes should be placed in a metal container with a tight-fitting lid.
TRANSPORTING AND STORAGE: WARNING • Never move a grill when it is hot or when objects are on the cooking surfaces. Never store flammable liquids or spray canisters under or near the grill. DO NOT extinguish grease fires using water. BEFORE STORING YOUR GRILL: • Clean all surfaces. • If storing the grill outdoors, close the wood pellet lid and cover the grill with a cover for protection from the weather.
TROUBLE SHOOTING: PROB L EM LCD screen will not light up CAUSE CORRECTION 2. The fuse is blown. 1. Make sure the grill is plugged into a working power source. Check and make sure wire connections are properly connected. 3. Check that the GFCI outlet has not been tripped. 2. Check the fuse and see if it has blown and needs to be replaced. Use 5 Amp Fuse. 4. Control knob is in the “OFF” position. 3. Reset GFCI outlet. 1. Grill is not plugged in. 4. Control knob is still in the “OFF” position.
WIRING DIAGRAM: 13
ASSEMBLY INSTRUCTIONS: READ ALL SAFETY WARNINGS & ASSEMBLY INSTRUCTIONS CAREFULLY BEFORE ASSEMBLING OR OPERATING YOUR GRILL. WE RECOMMEND TWO PEOPLE WORK TOGETHER WHEN AS SEMBLNG THIS UNIT.
15
6 Step 1 16 • Use 16pcs of M4x12 screws to assemble the 4pcs of legs (No.4) together with 2pcs of leg support pcs ( No.6) 4 7 8 Step 2 • 16 Assemble the 2pcs of casters (NO.7) and 2pcs of casters with lock ( No.
Step 3 • Place the grill body (No.2) on the trolley 2 Step 4 • 18 Assemble the chimney (No.
10 Step 5 • Use 2pcs of M8 to assemble the lid handle (No.10) onto the grill lid Use 4pcs of M6x12 screws to assemble the pellet hopper side handle (No.3) onto the hopper 3 9 Step 6 • Place the side shelf (No.
Step 7 • Place the cooking grate (No.12 ) into the grill body Step 8 • 20 12 11 Place the upper warming rack (No.
Step 9 5 • Place the grease bucket (No.
Model KP190124S Warning ! This product is under US and Europe patent protection, all rights reserved ! 22
