User Manual
Dimensions & Installation
OSD Menu
NTSC 4:3 PERSONAL
RUNCAM
· ·
QUICK SETTINGS
Quick settings:
·
· Long press UP button for three seconds to access
to the OSD setting‘s screen
·
· Long press DOWN button for six seconds to reset
OSD settings to default
·
· Long press RIGHT button for three seconds to
switch between the camera presets
· · CLR: clear the ID character;
·
· Press the middle button to switch ON / OFF, then
move to POS to enter the position adjustment.
RUNCAM_ _ _CLR
OSD Menu
1234567890ABCDEFGHIJ
KLMNOPQRSTUVWXYZ&:=./
PILOT
EXIT
: ON
SCENE : PERSONAL
SCREEN : 4 : 3
SYSTEM : NTSC
GESTURE : OFF
SHARP VIEW : ON
POS
Parameters
Gesture Control
SETUP MENU
· ·
SETUP MENU
· · LANGUAGE ( ENGLISH / DEUTSCH / FRANCAIS /
PYCCKNN / PORTUGUES / ESPANOL / 中文 )
· · DAY / NAGHT ( MANUAL / AUTO )
· · WHITE BAL (ATW / PUSH / USER1 / USER2
/ MANUAL / PUSH LOCK )
· · FLIP ( OFF / H-FLIP / V-FLIP / HV-FLIP )
· · BRIGHTNESS ( 128/ 0-255 )
Camera Menu
PICT ADJUST
· · CONTRAST ( 138 / 0-255 )
· · SHARPNESS ( 128 / 0-255 )
· · HUE ( 90 / 0-180 )
·
· COLOR GAIN ( 138 / 0-255 )
FLIP
BRIGHTNESS
CONTRAST
SHARPNESS
HUE
COLOR GAIN
RETURN
OFF
128
138
128
090
138
PICT ADJUST
DAY / NIGHT
WHITE BAL
LANGUAGE
CAMERA RESET
EXIT
· ·
Activation:
The camera is powered on, when the RunCam text appears on the boot interface, please block the camera
completely with the hand for 3 seconds. If only Personal appears at the top of the screen, it indicates that the
gesture control is activated. If NTSC/4:3/Personal all appear at the top of the screen, the camera has entered the
normal working state. Need to re-power on and try again.
· ·
Operating:
1. If the hand does not release, every 3 seconds Scene / System / Ratio will switch circularly.
2. Release the hand, the current function character will flash, after flashing 3 times, block the lens with your hand
and then move it away, changing the current function parameters once.
3. Block the lens with your hand and do not remove it. 3 seconds will switch to the next function.
4. After the adjustment is completed, wait for 3 seconds for the camera to automatically restart, and the current
camera system/ratio/scene will be displayed briefly at the top of the screen.
Gesture Control Demo Video: https://youtu.be/jxCNkINpdDI
*The default setting is off, the switch is in the OSD menu
www.runcam.com
ENGLISH
YES
MANUAL
AT W
RunCam Racer Nano 2
USER MANUAL
14mm16mm
14mm
M8 Lens
M2 Screws
3.6g
Model
Image Sensor
Horizontal Resolution
Lens
Signal System
S/N Ratio
Electronic Shutter Speed
Min. Illumination
Day/Night
Menu Control
Housing Material
Net Weight
Dimensions
RunCam Racer nano 2
Super WDR CMOS Sensor
1000TVL
2.1mm (M8) FOV145° / 1.8mm (M8) FOV 160°
NTSC / PAL Switchable
Screen Format 4:3 / 16:9 Switchable
>50dB
One touch Scene Setting Personal / Lightrax / Darkness
Integrated OSD Yes
Mirror System Available
Color
WDR Super WDR
Gesture Control / Joystick Control
0.01Lux@1.2F
Auto
ABS
Power DC 5-36V
Working Current 100mA@5V / 40mA@12V
L14mm*W14mm*H16mm
5-36V
GND
Video
Menu
Racer Nano 2