SG9667DC2K QUICK START GUIDE
Product safety & precautions Thank you for purchasing the Street Guardian SG9667DC2K Dual Channel Digital Video Recorder (DVR), please read and follow this quick start guide before installation and use. [Note] A more detailed user guide for this product is available for download from the support section of our website at https://streetguardian.
Introduction The Street Guardian SG9667DC2K Digital Video Recorder is preconfigured with logical default settings and is supplied ready to use once installed with a minimum of adjustment needed to personalise to your needs.
Camera layout & Overview Installation The DVR front camera unit should preferably be mounted behind, or to either side of the rear view mirror and within the sweep area of the windscreen wipers.
[Note] The rear camera is cabled to the front camera unit, ensure cable alignment and orientation is correct before attempting to connect any cables, if the vehicles is fitted with SRS airbags care must be taken not to inhibit the operation of these systems, professional installation is recommended 1.
2. Fix the power, rear camera, and GPS cables properly using cable clips (if required) and route all cables across the passenger side, preventing the line of sight from being affected. 3. Insert the charging interface of the in vehicle charger into the USB interface of the DVR. 4.
Settings The DVR is preset with logical default settings and is ready to operate, when powered on the internal capacitors will charge, the DVR will then power up and recording will commence, the time and date settings are automatically updated via GPS (if fitted) and will sync periodically to maintain accuracy, the time zone will need to be configured to your specific region to ensure correct operation.
against faults in material and manufacture for a period of two years. If Warranty is required during this period, please contact your place of purchase to arrange a Return Merchandise Authorisation, (RMA). The repairs/replacement will be carried out at no charge to the owner, subject to the conditions specified herein.
data, please ensure that you have saved this data elsewhere prior to repair. Australian customers: Our goods come with guarantees that cannot be excluded under Australian Consumer Law. You are entitled to a replacement or refund for a major failure and for compensation for any other reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure.
Resolution QHD 2560 x 1440 + FHD 1920×1080 Frame Rate 30FPS Video Format MP4 LCD display 2.0 inch Storage Temp -40C to 85C Operating Temp: -20C to 70C Optimal operating Temp: -10C to 60C Operating Humidity 15% to 65% (RH) Memory Card* 32 GB to 512 GB [Note] *Memory cards must be formatted in the camera to ensure compatibility using the built-in formatting menu option, not all brands supported, consult your dealer for recommended memory cards.
The specifications and details within this guide are based on the Australian market version of the product and are subject to change. The pictures used are for illustration purposes only. Information about the latest specification, amendments, the availability of replacement parts and accessories, warranty information, detail of other sales region product specifications and their respective user manuals are available on our website. FCC Caution. This device complies with part 15 of the FCC Rules.
communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -Reorient or relocate the receiving antenna. -Increase the separation between the equipment and receiver.
